Liczymy pasujące modele…
A sweet little strawberry — tiny, bright, and full of charm! 🍓 Height: ~16 mm ✨ Perfect for dioramas, playful décor, or tiny gift surprises 👌 Fits perfectly with other miniature fruits in the series A juicy pop of color to brighten any…
Wydruk około 0,20 €–0,25 € nettoWstępna wycena jednego wariantu
A connector to make a pentagonal prism out of straws. Uses the white part of the straw from boxed milk.
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
A simple stand to dry straws after washing. I printed it with organic supports, using 0.2 mm layer height with regular PLA. It works perfectly. I’ve attached a Gcode file with organic supports in 0.2 mm.
Wydruk około 6,89 €–8,42 € nettoWstępna wycena jednego wariantu
A connector to make a pentagonal antiprism out of straws.
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
The texture of the hat is designed to look like real straw. The hat is available in version A (2 filament changes) and version B (16 filament changes). In version A the red band is both internal and external, in version B the red band is…
PATREON : https://www.patreon.com/cw/mona3dstudio Join my Patreon this month: for just €10, you’ll get 6 designs from the Welcome Pack, this month’s new files, and a permanent 30% discount on everything else! Don’t miss out on this deal!…
The speed will depend on the machine and the type of PLA you are using. I always recommend that the first layers be printed at a speed between 10% and 20% (although if you are confident and know that the bed is perfectly leveled, you can…
Recently I was asked to make a better storage system for my mom's re-usable straws. She wanted a bigger box, I said why not think vertically! The design is meant for the inside of a cabinet but can be placed anywhere! Included models are…
Lifestraw Peak STRAW adapter for backflushing with a bottle this filter is very strangely designed. the clean end only has a mouthpiece and no way to use a syringe or bottle in order to backflush it. the recommended way according to the…
This is a tool to quickly plant bare root strawberry plants. It can push the roots up to 9 inches deep. Similar to the tool used in this video:
The stand for garden strawberries will allow the berries to grow without touching the ground. This reduces the likelihood of rotting and damage by pests. And the berries become cleaner. The stand is assembled from 4 parts and 4 legs. The…
Unleash your inner dragon! This 3D printable model brings an Eastern Dragon head to life as a unique straw topper. Highly detailed and easy to print, it's perfect for adding a touch of fantasy to your drinks. Print flat with no supports,…
This charming two-piece vase brings a touch of nature and traditional craftsmanship into your space. Its design is inspired by rattan or straw weaving, with an organic texture that evokes the beauty of the countryside and the authenticity…
A perfect way to save plastic and money!
I know this is nothing new in general but i decided to make a set of 3d printed straws that are easy and efficient to clean. Printed models used in contact with food and beverages must be cleaned well. This can sometimes be a problem…
screw cap for drinking glass with straw hole
Needed a solution to organizing / storing drinking straws (drawer isn't an option for us; my wife wanted them where she keeps the insulated cups). Pulled together this straw caddy in OpenSCAD. Customizing: To make wider or less wide,…
You probably want to customize this design before printing. The STLs fit WMF-brand metal straws (180mm long, 8mm outside diameter) in an 80mm tall drawer. Customization The OpenSCAD source files and further instructions are available…
This is a panda bear leaning up against a large piece of bamboo which your silicone straw slides through.
to conect straws,fold th straw end like a U
Unleash your inner dragon! This 3D printable model brings an Eastern Dragon head to life as a unique straw topper. Highly detailed and easy to print, it's perfect for adding a touch of fantasy to your drinks. Print flat with no supports,…
This is a good replacement for original WD-40 straw which really hard to install, I always have issue with that. This straw replacement firmly sit on WD-40 can, but if you have issue to store can with the straw, then you find clip useful,…
Strawberry-shortcake The size can be adjusted in the slicer 25% infill ,quality 0.2 supports no , pla colors can be added in the slicer Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
This is a Remix of the 3D Benchy by Prusa Research (CreativeTools.se) for use as a Straw Topper on your favorite drinks. I Scaled down the Z axis, Simulated Water for the Base, Enlarged the Smoke Stack and added a 8.5mm hole for a straw…
This is a temporary use replacement straw/tube for the PetLibro Dockstream water fountain. My cats ate the original so t
This package was developed at the Aquatic Germplasm and Genetic Resources Center (AGGRC) and designed by Sarah Bodenstein at the Louisiana State University Agricultural Center.
Introducing: The High Flow Water Fountain Straw! Built for those who don't get enough water from the normal drinking spout, the High Flow Water Fountain Straw should fill your mouth in under a second. Additional feature: If you fill up…
Hey, we designed this hydroponic tower after we tried some other models here. Unfortunately, we were not happy with other models for our usecase. We want to grow up fruits ad vegetables. We needed more stability and bigger pots, so I…
Passend zum Schulanfang gibt es einen kleinen Benchy-Remix: Ein Benchy als aufsteckbare Stiftfigur - das Penchy. Dank des leicht konisch zulaufenden Einstecklochs ist es für diverse Blei-/Buntstifte, Fineliner und viele andere Stifte…
Credits This Was Not Made By Me Don't Credit Me Give The Guy Who Made It Credit The Link To The Original Is Here: https://www.tinkercad.com/things/jL5AdsdRVvu-strawberry-elephant-slightly-remodeled Just To Make That Clear
🎄✨ Add a little holiday cheer to your favorite tumbler! Meet the Kawaii Christmas Tree Straw Buddy — a cute and festive 3D printed accessory that hugs your straw and instantly transforms your cup into a merry, feel-good drink companion.…
Just an easy tool to remove the crown from your strawberries. Prints in less than 20min with less than 3m of filament. A bit of support is needed.
Print it with a 0.4mm nozzle, and 0.1 layers for perfect fit, the model 2 it's a little bit thicker and kinda grabs better.
This can hold multiple straws without them falling over. The bottom is open in case a straw is still damp when it gets put away. I used double died tape and it seems to hold up well. Time will Tell!
Baseball Straw Topper - 8mm and 10mm designs Commercial License available
This piece captures the charm of classic Valentine imagery with a rich bouquet of strawberries—each uniquely decorated with drizzles, patterns, and heart motifs—tied together with an elegant bow. Encircled by ornate detailing and…
Noticed glass straws were left in cups and in the sink where other items got put on top of them. As you can imagine with glass, this can lead to broken straws, which could lead to cut hands, which could lead to sepsis, then antibiotic…
This is a panda bear leaning up against a large piece of bamboo which your silicone straw slides through.
The One Piece Straw Hat Jolly Roger as a Zipper accessory. The Clip and Logo are already to scale, just adjust as needed. There are two files, the jolly roger and the clip. Measure the opening of the zipper hoop and then scale the…
Decided to make my own storage for the lids and straws. The angled section for straws has a separate plate that slides into grooves so there is a gap at the bottom for any moisture to run out and keep things from getting messy. If you put…
File 1 - Classic Hearts File 2 - Spicy Hearts File 3 - TS Hearts Print Face Down, no supports.
I have included two 3MF files with painting. The one with the hat printed separately only requires a maximum of 4 colors per layer and can therefore be printed with a single AMS unit. Printing in this way requires pausing and changing…
A large pot of gold to top your favorite cup. Made to fit the 10mm straw size, but smaller would obviously work. Also made a smaller version of the pot, since the printed one may be larger than desired. Just be careful with the supports…
10mm and 8mm Basketball Straw Buddy Commercial License Use
10mm and 8mm Soccer Straw Buddy Commercial License Included
PATREON : https://www.patreon.com/cw/mona3dstudio Join my Patreon this month: for just €10, you’ll get 6 designs from the Welcome Pack, this month’s new files, and a permanent 30% discount on everything else! Don’t miss out on this deal!…
Clip on flower pot shelf designed to support growing strawberry plants. Default settings supports GreenStalk planters. OpenSCAD code written with AI, edited by me.
❄ Frozen Sisters Straw Topper – Jégvarázs Szívószál Dísz Dobd fel az italokat egy kis varázslattal! Ez a 3D nyomtatható szívószál dísz szett két ikonikus karakter sziluettjét idézi, amelyek tökéletesen passzolnak bármilyen gyerekzsúrhoz,…
Free swappable plank set for the Modular Round Shield Housing Kit . Five PETG planks with a 4-colour Straw Hat pirate jolly roger emblem. Designed for 3-7 year olds who may be bold but need a little protection when facing their older…
Clips on to the side of a glass or a cup to hold a straw in place. Cocreated with OT to support Speech Therapy practice.
Recently I was asked to make a better storage system for my mom's re-usable straws. She wanted a bigger box, I said why not think vertically! The design is meant for the inside of a cabinet but can be placed anywhere! Included models are…
My son loves his play kitchen and loves it when I 3d print him things, so I wanted to make some kitchen related items for him to play with. The initial version of this model was just a cup (and much smaller), but for v2 I increased the…
This straw should be easy to 3D print. However, removing supports from the fins may be difficult. Attach the fins at the back, and the head at the front.
To help in preserving our favorite planet, please dispose of your straws in such a way that they don't impact the foraging wildlife that those straws may end up in. Just place a razor blade in the proper orientation (blade edge facing the…
It's for straws of 22cm in length and 12 mm in diameter. Or fit your chopsticks. Print Settings: Printed 100% for best hinge strength. Post Processing: Scrape off the top layer on the hinges if they get in the way 22 公分長，12 毫米直徑珍奶吸管收納盒。…
I designed this wall mounted straw holder for my mom's silicone straws. It's really difficult for them to stand up right because they're so soft. It also help with drying them as well and allows air to flow through both ends. Mounts to…
This case will hold 4 re-usable straws or 3 straws and the cleaning brush. Keeps them clean and safe, but still provides airflow so they can dry out and not get moldy. Prints flat, but requires (2) 4-40 screws for the hinge. Designed with…
testing a design with Blender Print Settings Printer Brand: Creality Printer: Ender-3 V2 Neo **Rafts:** Yes Supports: Yes Notes: 9cm (3.5") height, I failed smaller sizes Better result with raft and supports. Category: Sculptures
My wife's church group recently had 40oz tumblers made with the groups name and insignia on them. I thought it would be helpful to print TPU caps for the entire group. I printed the first batch in Overature blue 95a TPU, and those are…
Apart of a series of different themed Axolotls I randomly came up with ^^. supports are recommend to print :) Category: Sculptures
Designed with ♥ in Tinkercad Fun and fast Halloween print, great for classroom, gift bags, giveaways, trick or treat bags, etc. 8mm opening for both pencil and straw toppers. To make the spinning fidget pencil topper, print both Ghost -…
I made this bookmark for any One Piece fans. Your like/download or make would mean the world to me.
My family has been obsessed with the 3D Printed straw toppers I made previously and so they requested I made some Disney ones. I modeled these myself specifically to work on a single extruder printer. The bow can be printed in any color…
Designed with ♥ in Tinkercad Fun and fast Halloween print, great for classroom, gift bags, giveaways, trick or treat bags, etc. Pencil Toppers have 8mm opening: • Pumpkin - Pencil Topper - No Spin • Pumpkin - Pencil Topper - Spin Straw…
I used PETG for food safeness. I had a 0.6 nozzle installed so I did a 1.2mm wall. That version has a 5mm hole, which is standard drinking straw. But I am uploading a version scaled down to 0.8 wall, which has a 3.3mm hole. Fine for…
The model by Wolfcrest was already a great starting point, but I noticed that the straws weren't held securely in place. So I added some guides in the middle to prevent the straws from exiting to the side while inserting. I also increased…
I found this image and decided to make it into a lithophane. I used a 1 M LED strip, but you can always use the BBL LED strip, or I bought a few off of aliexpress, the Dollar Store. This turned out great. I hope you like it. Please like…
Bring a touch of summer to your workspace with this 3D-printed 'Summer' desk decor, crafted from eco-friendly PLA. The playful design features the word 'Summer' with a unique twist: the 'U' is cleverly transformed into a refreshing drink…
English : This 3D model depicts the famous pirate logo of the Straw Hat Gang, inspired by One Piece. The skull is wearing Monkey D. Luffy's characteristic straw hat, which perfectly symbolizes the crew's spirit of adventure and unwavering…
I made this several years ago after we accidentally put my daughter's bendy straw in the dishwasher where the heat unbent the straw. To use the tool print it out in the highest temperature resistant material you have, at least PETG. Get…
You need to program a pause at height 3.4 mm and add two 10 mm diameter x 3 mm thick (or less) magnets in the holes embeded. Glue them in their hole so they do not fly at your hot end when you resume printing. The distance between the…
Strawberry Planter Pot - Fun and Functional! 🍓 Bring a pop of color and charm to your home or garden with this strawberry-themed planter pot ! Designed to hold standard-sized potted plants, this vibrant planter is both practical and…
I had someone on MakerWorld request a chihuahua straw topper, so here we are! Print flat with no supports. Originaly model: https://www.printables.com/model/1006584-chihuahua Category: Kitchen & Dining
Dummy 13 straw hat Based on Monkey D Luffy's straw hat from One Piece. Printing settings You should use supports, and I'd use PLA but i'm sure you could get away with pretty much anything. For the red band I just switched filament mid…
Support to store vertically 6 glass straw. Can be used like a drainer. If your straw is moving, you can easily close the clamping part with a hot air gun My straw: https://www.amazon.fr/dp/B0B37N8VQT?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
A friend requested this, and I couldn't find a model so, I made one. Used the 2d image from the bookmark and extruded it, added a hole to fit on the straw, and added a tether and loop. sized for Stanley, but you can resize the holes and…
