1 / 1
HeyGears Ultracraft RS rear cover plug
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A rear cover plug to use with the heated resin tank/pulsing release system of the HeyGears Ultracraft RS
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 346
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (12)Powiązane
This is a super simple easy-to-print plug for the rear cover of the HeyGears Ultracraft Reflex RS.
It has a hole in the center to accomodate the cable for the heated resin tank. All you have to do is print it in TPU and then do a small cut until you reach the center hole so you can insert the cable in. Then, just plug it in place. It keeps things neat and helps insulate the printer.
I printed it in Polymaker Polyflex TPU95 Black. Better to print it in slow speed.
- 3 walls
- 4 top and bottom shell layers
- 7% gyroid sparse infill density