26 modeli
If you read this, please leave a ❤! While using my original design I noticed it was difficult to grab onto the build plate with one hand. The caddy was in the way! I've mirrored the design so it mounts on the back of the plate instead of…
Two models are included, the entire plate can be printed at once if you have a large format machine. For smaller machines, the plate is cut into 3 parts and fixed using 2 structures requiring 3.5 / 4 mm diameter wood screws (they must be…
Printed on fdm printer @ 0.2 layer height. Use 4 or 5 perimeters, 20% infill. No supports I used the mouse ears at the corner to prevent lifting, they are 0.2mm high so can be popped off after printing.
Check out the new version! https://www.printables.com/model/1046454-drip-caddy-v2-for-heygears-reflex-rs The Reflex RS's flat build plate really holds onto resin. I didn't really like any of the options HeyGears provides. They were all…
This is a remix of the original side drainer provided by HeyGears. With the original model, you'll have to use two M4x12 screws in order to secure it to the build plate. There are also other solutions out there to hang the buildplate at…
A smal holder for having the print bed in an angle for the resin to run off your print. Keeps your workspace neat and tidy. The holder needs little material, prints fast and is robust. You can mirror this part in slicer. Doing so, you can…
This shim will allow you to use your HeyGears Reflex build plate inside your wash bucket. The shim is pressure fit, and will line up roughly with the max fill line of the bucket itself. I tend to print a full build plate of smaller items,…
Update 01/14/2025: As many have requested for different fume extraction methods. Now included the basic shape STEP file for cleaner remixes. Please share your remix, thanks. Connect your BOFA PrintPro or equivalent 50mm air hose to remove…
A small funnel that screws onto HeyGears resin bottles. It's designed to push down the spring-loaded stopper inside the bottle to allow resin to be poured into the bottle freely without needing to keep any pressure on it. The funnel is…
A remix of "Drip Caddy V2 for Heygears Reflex RS" by wolffaayyy , this drip caddy adds a slight twist to the build plate mount, so that the center channel where the plate connects to the mount can drain. This does cause two corners to…
This Driptray can snuggly fit onto the Heygears Reflex RS Resin Tray. I created it, because when lifting the finished print i always had problems with Resin dripping everywhere. Now, you can just remove it and rotate it more easily to…
This is here only for legacy reasons. Please use the updated design: https://www.printables.com/model/1109161-heygears-reflex-rs-print-bed-holder-drip-caddy A smal holder for having the print bed in an angle for the resin to run off your…
This is a remix of the Heygears Reflex RS RefleXtractor by @Jerry_Lee to make use of 3in/80mm diameter hoses. The model was remixed to be smaller, easier to fit on most print beds, and printable in one piece. A few fitment tweaks were…
Combination of two models: https://www.printables.com/model/1067564-funnel-for-heygears-resin-bottles/files https://www.thingiverse.com/thing:3135135
Adaptateur d'évacuation d'air UltraCraft Rs, se visse de l'intérieur après avoir passé le câble du plateau chauffant. Impression sans support.
This is a super simple easy-to-print plug for the rear cover of the HeyGears Ultracraft Reflex RS. It has a hole in the center to accomodate the cable for the heated resin tank. All you have to do is print it in TPU and then do a small…
This retainer clamp is to be used with the Hey Gears washing station. If the sieve in the washing tank shakes loose, you can insert this retainer and fix the sieve in place. This in only needed with the “old style” of tanks. The new ones…
Mod para instalar un filtro de carbón en la salida trasera para reducir el olor de la resina. Hay dos modelos para filro de 50mm y 100mm de profundidad disponibles en este enlace.…
It's a pretty straightforward build. Print out this model. Take one of your heygears resin bottlelids, cut the top off, and then superglue it to the bottle drip caddy. The bottle is light enough since it's basically empty. Just let it…
While HeyGears RS series is very popular, the Reflex series, especially the Reflex 2 series, is less so. But if you want to use HeyGears line of engineering resins, it's the better choice. Thus I went with the Reflex 2 for my maker lab.…
A remix of the clip by @AlbionRapture which has been widened to just about 12.34mm so that it can clip to the HeyGears RS/RS Turbo vat.
This project builds upon Tyler's enclosure system to adapt to resin printing. It is a very large enclosure, 36"x36"x28" to accommodate the upward lifting cover of resin printers. The main purpose is to vent the toxic resin VOC's to the…
This is here only for legacy reasons. Please use the updated design: https://www.printables.com/model/1109161-heygears-reflex-rs-print-bed-holder-drip-caddy A smal holder for having the print bed in an angle for the resin to run off your…
A small funnel that screws onto HeyGears resin bottles. It's designed to push down the spring-loaded stopper inside the bottle to allow resin to be poured into the bottle freely without needing to keep any pressure on it. The funnel is…
A remix of the clip by @AlbionRapture which has been widened to just about 12.34mm so that it can clip to the HeyGears RS/RS Turbo vat.
This project builds upon Tyler's enclosure system to adapt to resin printing. It is a very large enclosure, 36"x36"x28" to accommodate the upward lifting cover of resin printers. The main purpose is to vent the toxic resin VOC's to the…
