Funnel for HeyGears Resin Bottles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small funnel that screws onto HeyGears resin bottles, allowing resin to be poured into the bottle easily.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 131
- Wydruki
- 0
- Wyświetlenia
- 611
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
A small funnel that screws onto HeyGears resin bottles. It's designed to push down the spring-loaded stopper inside the bottle to allow resin to be poured into the bottle freely without needing to keep any pressure on it.
The funnel is relatively small to allow for easy printing. A larger funnel and/or a filter can be placed on top of it.
This has been tested on the current bottles of PARP10 and PAP10 resins. It may or may not be compatible with other bottles or past or future bottle dimensions. I've only tested pouring resin into the bottle, so if you want to use this for pouring resin out of the bottle, I can't guarantee you won't make a mess using this.
Edit: I'm now aware that the bottles have a second screw top. I'll leave this here in case it's still useful to someone.