Angled & Dockable Switch Grip (with jig slot)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified the switch grip a bit using a few ideas people have already thrown around on here, modified mine to be a…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 339
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution
Modified the switch grip a bit using a few ideas people have already thrown around on here, modified mine to be a secure fit while maintaining the original comfort of the v3 grip. I also angled it by about 15-18 degrees so when your sitting at a table playing with a controller its more comfortable to look at. It shouldn't fall over too easily. The front foot is extended a bit downward and the whole thing is printed at an angle. Also has a slot for the Jig mentioned in remixed files.
Extra supports recommended as making it print on an angle also seemed to make it unstable and likely to fall over during printing. I made my overhang angle around 55 degrees to compensate and give it a bigger raft.
Some credit to this thing: 4975623 also, from ncloven. I used the joycon fit dimensions from his model for a snug fit. (maybe a bit too much with a 0.6mm nozzle, takes a tiny bit of paint off if taking them off often, be careful)
Category: Toy & Game Accessories