Planter with drainage collector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Planter with three pieces, the plate goes into the center and the screw acts as a stopper
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
You can print this as three separate pieces. It scales down evenly with each separate piece, so just adjust the scale accordingly on each of them. I can provide a .3mf file if anyone wants one.
The plate goes into the center where water drains downward, then the screw-in stopper plugs the drainage. You can put a rubber O-ring on the screw to stop it leaking. I recommend painting and varnishing everything to keep it from degrading.
Recommend printing it with PETG or other water resistant filaments.
Recommend using a small layer height to make the designs cut into the sides nicer looking, although this will make the print time very long (longer than a day depending on the scale).