Planter with drainage collector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Planter with three pieces, the plate goes into the center and the screw acts as a stopper
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 108
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Share Alike
You can print this as three separate pieces. It scales down evenly with each separate piece, so just adjust the scale accordingly on each of them. I can provide a .3mf file if anyone wants one.
The plate goes into the center where water drains downward, then the screw-in stopper plugs the drainage. You can put a rubber O-ring on the screw to stop it leaking. I recommend painting and varnishing everything to keep it from degrading.
Recommend printing it with PETG or other water resistant filaments.
Recommend using a small layer height to make the designs cut into the sides nicer looking, although this will make the print time very long (longer than a day depending on the scale).