1 / 1
TinyTendo TNY-TKROM Low Profile MMC3 and SRAM Cartridge Bottom
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified Shell with Thicker Walls for Sanded MMC3 and SRAM Chips
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 89
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Share Alike
This cartridge bottom is for TinyTendo TNY-TKROM cartridges created as part of Redherring32's project which have the MMC3 and SRAM chips sanded down (from the bottom) to be thinner and allow for thicker cartridge walls.
TinyTendo Project: https://github.com/Redherring32/TinyTendo
TinyTendo TKROM Boards: https://github.com/MouseBiteLabs/TNY-TKROM
TinyTendo NROM Boards: https://github.com/MouseBiteLabs/TNY-NROM
Printed with the following settings but is simple enough to work with others:
- 0.20mm Layer Height
- 15% Infill
- Printed with a brim to help adhesion, not required