1 / 1
TinyTendo TNY-TKROM Low Profile MMC3 and SRAM Cartridge Bottom — image 1

TinyTendo TNY-TKROM Low Profile MMC3 and SRAM Cartridge Bottom

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Modified Shell with Thicker Walls for Sanded MMC3 and SRAM Chips

Rating
0 / 5
Likes
0
Downloads
8
Makes
0
Views
89
Reviews
0

Updated at source:

Model information

Category
Video Games
License
Creative Commons — Attribution — Share Alike

This cartridge bottom is for TinyTendo TNY-TKROM cartridges created as part of Redherring32's project which have the MMC3 and SRAM chips sanded down (from the bottom) to be thinner and allow for thicker cartridge walls.

TinyTendo Project: https://github.com/Redherring32/TinyTendo

TinyTendo TKROM Boards: https://github.com/MouseBiteLabs/TNY-TKROM

TinyTendo NROM Boards: https://github.com/MouseBiteLabs/TNY-NROM

Printed with the following settings but is simple enough to work with others:

  • 0.20mm Layer Height
  • 15% Infill
  • Printed with a brim to help adhesion, not required