DeLonghi Dedica Knockbox with perfect fit on top
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Knockbox fits exactly on top.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 388
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The .stl contains two versions - left vs. right side. The whole box needs a lot of filament. To prevent fails and time my attempt would be:
1. Left side = Either you print the whole complete version on the left side with support structure
OR
2. right side = you first print only the bottom and check if it perfectly fits on the top of the Delonghi. And then print the rest of the box and connect both parts with some simple glue (that's what I did).
Maybe adjust the diameter of the holes or even close them in case you have bigger / suitable stick or pipe (18 - 18.7mm like in the original version without holes). Personally I prefer a wooden stick.
