DeLonghi Dedica Knockbox with perfect fit on top
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Knockbox fits exactly on top.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 43
- Makes
- 0
- Views
- 394
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The .stl contains two versions - left vs. right side. The whole box needs a lot of filament. To prevent fails and time my attempt would be:
1. Left side = Either you print the whole complete version on the left side with support structure
OR
2. right side = you first print only the bottom and check if it perfectly fits on the top of the Delonghi. And then print the rest of the box and connect both parts with some simple glue (that's what I did).
Maybe adjust the diameter of the holes or even close them in case you have bigger / suitable stick or pipe (18 - 18.7mm like in the original version without holes). Personally I prefer a wooden stick.
