1 / 10
3D Printer Camera Rail-Mount - Logitech C525 & others
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This camera rail-mount / holder allows you to change the height and Z-axis rotation of your camera. Using the joint on…
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 51
- Wydruki
- 1
- Wyświetlenia
- 874
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (1)Kolekcje (15)Powiązane
This camera rail-mount / holder allows you to change the height and Z-axis rotation of your camera. Using the joint on the camera you can also change its pitch. The rail can be mounted vertically on the leg/side of the enclosure.
You can mount the slider both ways, as it suits you.
Currently supported cameras:
- Logitech C525
- Microsoft LifeCam HD-3000
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
No
Supports:
Yes
0.20
Infill:
15%
Notes:
- Print STLs as layed out
- Knob and Slider are printed at 0.15 mm resolution height
- Knob and Peg infill: 60%
- For Slider use supports on "Build Plate Only" - donot use supports for the threads
- Knob: no supports, slower print (25%-50% speed due to the screw threads)
- Before printing ensure that the printer is not overextruding, by using this simple test: https://www.thingiverse.com/thing:2372705
- Carefully screw the Knob into the Slider for the first time, to ensure that the threads are clean and smooth.
Category: 3D Printer Accessories