Liczymy pasujące modele…
This is a small bracket that mounts to the front of a Microsoft LifeCam HD-5000. You can incorporate this into a more complex model, arm, or bracket. Great for making a timelapse camera or adding to your 3D printer. I printed in PLA, at…
A 3D pin of Microsoft Fabric's logo
Hi, this is a Stand vor the Microsoft Surface, i printed this because my Tablet was getting pretty hot when im writing. I bought 2 Aluminium rods (Dia 8mm) in my local DIY-Store and some Rubber stopper…
This is a simple clip that snaps onto the top of the Makerbot Headphone Stand ( http://www.thingiverse.com/thing:2050885 ) to better hold my Microsoft LifeChat LX-3000 headphones. The cord and overall bulkiness causes them to slip off…
Well, I already think you understand.
This is a small bracket that mounts to the front of a Microsoft LifeCam HD-5000. You can incorporate this into a more complex model, arm, or bracket. Great for making a timelapse camera or adding to your 3D printer. I printed in PLA, at…
Microsoft Arc Mouse holder for Lidl/Parkside Pegboard Keep your Microsoft Arc Mouse within easy reach on your workshop or desk wall! This is a remix of the original honeycomb-based Arc Mouse mount, adapted to fit the Lidl/Parkside…
Used to hang a Microsoft Surface Tablet or Laptop on the wall. Works vertically or horizontally. You can hang with command strips or fasteners. I saw some other wall hangers on Printables, but they were not quite what I was looking for.…
This was designed for Prusa i3 MK3 and for Microsoft LifeCam HD-3000 , but it may fit the Prusa MK2 too I guess. Also, you may be able to attach any camera to it if it is secured with some zip ties. Although it is a snap-on design I…
A 3D pin of Microsoft Fabric Real-Time Intelligence's logo
A mounting bracket to add an infrared light source to Microsoft Lifecam.
I really like the Microsoft Natural line of ergonomic keyboards, but the Office key in the latest one is a nightmare under Windows, you can't remap or fully disable it (longpress still works), and if you did switch from the older one you…
This is a simple wall or enclosure mount that will house a Microsoft HD 3000 Camera. It can be printed without supports.
Was looking for rugged protective covers for Microsoft Surface Go 2 , couldn't find anything for my purpose, so had to design my own. I designed it specifically to use it with my Surface Go 2 but figured out that it fits for following…
Print in PLA or PETG, just glue it to the charger with a double face tape.
3d scan of microsoft wheel mouse optical 1.1a, no scroll wheel included, use it for shapetesting or smth
We've got broken the axle of the mouse wheel for our microsoft 1850 mouse. Found the replacement made by @someoneonly_24, but required to stick the axis to the encoder some way. As I don't like to use glue or heat electronical parts, I've…
Quick update on Microsoft Dynamics 365 Business Central logo by waldo. Can be printed in five parts. Category: Signs & Logos
Tired of tangled cables every time you grab your Windows Surface charger? Ever pulled your charger out of your bag, only to have the cable unravel and the adapter crash to the floor – or worse – onto your toes? Not anymore! This…
The cookie cutter is about 80 mm in length on its longest side. I printed at 0.2mm layer height at 10% infill. https://www.tiktok.com/@dailycookiecutter/video/7049145543871696175 Check out @dailycookiecutter on TikTok for more cookie…
Mounting for Microsoft Lifecam Studio to Quick Release Clamp No Support needed Infill 30% grid need 2pcs M3 x 35 bolt and nut 1pcs flat head M6 x 20 Print Settings Printer Brand: Creality Printer: Ender 3 **Rafts:** No Supports: No…
Wall mount for Microsoft Bluetooth mouse. Also fits other devices. Perfect for mounting on a shelf. I use it for a mouse dedicated to smart TV. Mocowanie na ścianę do myszki Microsoft Bluetooth. Pasuje także do innych urządzeń. Doskonale…
Mount to install Microsoft Live VX2000 or Microsoft LifeCam Cinema in the PrusaBox made by https://www.printer-box.com This mount was created to get the possebility to use “old” Microsoft WebCams togehter with the [Prusa] Box. Needed…
A wall mount for the Microsoft Surface pro 4 power adapter, it's a very tight fit. I made this for my own low-power usecase (using the surface pro as a home assist display), where the surface is drawing roughly 4-6 watt, so heat is not a…
Perfect for gamers and collectors, this detailed design captures the iconic style of the original Xbox. Whether you use it as a trendy keychain or a unique decorative piece, it’s a great way to showcase your love for gaming history. Note:…
The Cam mount can be secured to the boom with some help from prestick.
To-do: double-check dimensions (v0.1 model has estimated port spacings) add tactile port indicator bumps
I wanted a shorter and compact charger for my old Surface Pro 8, as it is sitting in the same socket basically all the time and the extension cable was in the way all the time. I bought a short connector (…
Covers for the earpiece knobs on the Microsoft Xbox headset. Only tested on the wireless version, let me know if it works for the wired version as well, I assume it does. Both sides are identical, print 2. Customizable with print surface…
A simple mounting bracket to connect a Microsift HD 3000 camera to the articulating arm
A printable replacement part for Microsoft keyboard. You can print it in 0.2 layer height with normal supports. I have printed with 0.4 layer height with variable layer height 0.25 (quality/speed). I hope you find it useful.
WHY MICROSOFT SURFACE KEYBOARD DOES NOT HAVE A STAND?
Added dual extrusion to the tags - pegs in one color, base in the other. Single extrusion is still supported, of course. Info on the tags here: msdn.microsoft.com/en-us/library/ee804885%28v=surface.10%29.aspx Tested working on the new…
Laptop chargers are always a hassle. This add-on for the Surface's charger makes managing the wires easier. Everything is printed in place. Tested with 0.4mm nozzle and 0.2 layer height. It is my first print in place design, so I'm not…
Reinforcement for the plug that connects to the laptop. Really helps if your dog or cat has tried to bite through it.
Interested in selling physical prints of my designs? Want to access a growing library of exclusive 3D models? 🚀 Unlock exclusive benefits and premium access with my membership. Membership: Exclusive models + Commercial License ---…
Interested in selling physical prints of my designs? Want to access a growing library of exclusive 3D models? 🚀 Unlock exclusive benefits and premium access with my membership. Membership: Exclusive models + Commercial License --- Retro…
Feeling nostalgic about Microsoft Office from early 2000s? Download and print this keychains for you or give to your coworker, friends and family! Info: Microsoft Office 2000 (version 9.0) is a release of Microsoft Office, an office suite…
Wall mount for a Surface 3 Pro and Surface Pro 5 (1796) Tablets in Landscape Orientation. I raised each corner with a gap height of 9.55 millimeters to fix the model. I also added fillets to the bottom edges of each corner to increase…
Wall mount for a Surface 3 Pro and Surface Pro 5 (1796) Tablets in Landscape Orientation. I raised each corner with a gap height of 9.55 millimeters to fix the model. I also added fillets to the bottom edges of each corner to increase…
Ender 3 S1 Pro Microsoft LifeCam Extruder Axis Mount
I have already made a cable guide for my headphones in the past, but that one required you to slide the thing on over the headphone jack. The headphones that I use now have a right angle headphone jack so I remade the model with a narrow…
This is a cover that covers the Microsoft Ergonomic Keyboard number pad. I made it so I could place my mouse on top of the number pad since I never use the number pad. Fusion 360 file included. Print Settings Printer Brand: Creality…
This is remix of C920 Ball Joint Mount for Articulating Camera Mount for Prusa MK3 for usage with MS Lifecam HD-3000.
Fun microsoft logo gimbal keychain fidget with rotating squares and amazing when colour printed
I didn't like how messy the charger for my Surface Laptop was when I put it in my bag and wanted to design a solution - armed with some calipers and some CAD software, I designed this and sent it off to my printer so that it would be…
feet broke off after someone leaned on the keyboard. reuse the rubber insert. printed with supports. print with colors because colors are fun.
An accurate but reinforced foot for Microsoft's "Wireless Keyboard 3000 v2.0" and probably others from their product range. It's a bit hard to push in but should hold up far better than the original part if made with good quality…
I have sold hundreds of these on my web store with matching fasteners. Given that the MS Dock 1 and 2 have been discontinued, I am making this design available for free. This model can be used with the following products: MS Dock 1 MS…
Webcam mount for that clips on to the outside of the door. Designed to suit the MS LifeCam Cinema but the FreeCAD file is included so this can be adapted to any camera. The door clip fits in the gap between the door and the steel frame so…
I noticed the charger for my Surface getting folded over a lot where the magnetic port transitions to soft cable, and so I printed a cover for it to extend the lifetime of the charger. This fits any laptop that uses a “Surface Connect”…
A remix of the Battery cover for Microsoft Bluetooth Notebook Mouse 5000 designed by targeos with more strong tabs added. To be printed with supports under the tabs. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports:…
Based off this, but it's portrait. I included a .stl of the screw hole which you can use to cut out screws in other places, and a .stl of one of the corners which you can use to check if it will fit your tablet (depth-wise).
Diese Halterung wurde speziell für das Netzteil der Microsoft Thunderbolt 4 Dock entworfen. Sie ermöglicht eine saubere und sichere Befestigung unter dem Schreibtisch, an der Wand oder an Möbeln. Für eine stabile Montage werden zwei…
Adapted To Ender 3 pro moved to: https://www.printables.com/@RobertBalandi_661414/ Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Doesn't Matter Resolution: 0.2 Infill: 35 Filament: no PLA Same as Sunrise but…
Replacement feet for Microsoft Natural Ergonomic Keyboard 400 v1.0 I have 2 versions, both should work, version 2 is more like the original, see what fits to your keyboard. Print Instructions PLA is OK, PETg is better to get all details,…
A simple replacement cover for the battery compartment of two AA batteries. The cover measures 58mm x 40mmm, has two hooks on the one side and a sprung latch in the centre of the other. I've left a slot in the cover to allow some…
Is your SSD screw stripped, missing or otherwise not good? This little spacer is designed to hold the SSD in place without the screw. Road tested on my machine and have not once had the SSD break loose! I hope you find this useful.
This is a minimalistic and sturdy stand for Microsoft Surface devices . The design focuses on stability, protection, and a clean look. I lined the inside of the stand with felt , which prevents scratches and ensures the Surface sits…
Prints in PLA without supports, orient it so the top is on the bed.
This is a camera mound for a Microsoft Life Cam to mount on the side of a flashforge creator pro Category: 3D Printer Accessories
A common computer mouse part that breaks is the scroll wheel axle. Initially, I tried printing a replacement out of curiosity but its actually more practical than I thought it is. The SW17 and stl files for the Microsoft 1850 mouse are…
Main: Ive created an adapter to adapt my current headphone's earpads to the CMF Headphones for a more comfy experience as well as better seal between my head and the headphones even while wearing glasses. Ive decided to share the model…
Made a Laptop Studio Mount to attach it to the Wall as additional Screen at my Makerdesk to organize the setup and safe Space on the Desk.
Microsoft Arc Mouse holder for Lidl/Parkside Pegboard Keep your Microsoft Arc Mouse within easy reach on your workshop or desk wall! This is a remix of the original honeycomb-based Arc Mouse mount, adapted to fit the Lidl/Parkside…
Used to hang a Microsoft Surface Tablet or Laptop on the wall. Works vertically or horizontally. You can hang with command strips or fasteners. I saw some other wall hangers on Printables, but they were not quite what I was looking for.…
This is a mount for the Microsoft HD-3000 Webcam onto a Lack enclosure (or any other 90 degree corner). The webcam just slots in the gap. Mounting is via 2x #10x0.5" (4.8mmx13mm) Pozi Flanged Panhead screws which i find always work well.…
I use the official "Microsoft Xbox Wireless Adapter for Windows 10", and I was sick of misplacing it, so this holds the USB adapter while I'm not using it. The adapter is approximately 8mm thick by 16mm wide. I intentionally made the…
I own two of Microsoft Wireless Mobile Mouse 4000, and the rubber coating on the scroll wheel has gradually worn and come off on both mice. I have designed a replacement part. I have printed it with TPU, and it fits well without need for…
Modification of a Microsoft Lifecam Cinema Webcam to an 1.25" Astro Camera. For disassembly, visit http://dslrmodifications.com/lifecam/lifecam1.html Just push gently the camera in to the cylinder. Add a foam disc to cover the blue light…
I spend a lot of time working on trains and find myself unwrapping and coiling the power cord to my Surface Pro 4 power adapter a lot. Therefore after 26 months (which is good considering the amount used - no complaints there) the…
Scroll wheel replacement for wireless Microsoft mobile mouse. Snaps in, no glue required. Either smooth or ribbed models. Ribbed version requires printing with 0.25mm nozzle setting although I still used a 0.4mm nozzle. Model made using…
Adapters for these nice 4K webcams that can be found surplus on eBay and Taobao. I recommend using only the female to male adapters, as the female to female adapters I tried were too temperamental because the USB-C plug is so short. Note…
Walll mount for Xbox controller. very nice model, which was perfect for my old xbox controller (USB dongle), but it does not has a perfect fit for the modern (Bluetooth) Version of the controller. this version is stretched a bit and some…
This replaces the scroll wheel that broke in your Microsoft mouse. I printed it in PETG for a bit of flexibility since pressing on the wheel causes it to bend slightly. It is important to print it with the axle horizontally for strength.…
Bring back a piece of classic computing history with Clippy, Microsoft's iconic Office assistant! This model is split into multiple parts, making it easy to print on virtually any printer without requiring an AMS or multi-color setup.…
I use a Microsoft Lifecam camera to watch my 3D printer and wanted a tripod mount for it. The bottom has a threaded 1/4-20 hole so it fits an ordinary tripod. To clamp the camera in place you need a M3x12 bolt and washer. I printed this…
Microsoft Surface Dock Under Desk Mounting Bracket
The origianal rubber feet fall of easily. These replacement TPU feet fit snugly in the screw holes behind the feet and are friction fit. No glue needed. Should you loose another foot, 5 minutes later and the replacement is ready. Print…
A Privacy Shield/Cap/Cover for Microsoft LifeCam Studio. I used Prusament Galaxy Black PLA and it fits perfect on the Webcam. Additional Parts 2x M2.5 x 5mm Button Head Screws Links The links to AliExpress are advertising links. I would…
This is a heavy-duty, space-saving mounting system designed to hang a Microsoft Surface Pro 7 tablet onto a desk shelf or pegboard setup. It features a robust M20×2.5 thread system that allows you to easily adjust the screen's viewing…
Flip cover for the Microsoft Lifecam. Print as one piece and use a razor blade to release hinge and then the cover from collar. Use 1.75mm filament as hinge pin. Revision History: v1 - Redrawn flip cover. v2 - Larger tabs on the cover, to…
So, I'm a cheapskate, and my vision isn't the best. Add the fact that SMT soldering is really hard without magnification, and I decided to buy one of those crappy 14$ USB microscopes on ebay, and it was kinda disappointing. The lens…
Microsoft KC-0405 Digital Media Pro Keyboard (discontinued) back foot/elevator/riser. This is a replacement design that is more durable than the original foot. The keyboard is no longer produced, but mine still worked (except for the…
