Microsoft Surface Dock 1 / Dock 2 / PSU under-desk mounting brackets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Brackets that will hold a MS Surface Dock 1, Dock 2 or either power supply to the underside of a desk
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 54
- Wydruki
- 1
- Wyświetlenia
- 310
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have sold hundreds of these on my web store with matching fasteners. Given that the MS Dock 1 and 2 have been discontinued, I am making this design available for free.
This model can be used with the following products:
MS Dock 1
MS Dock 2
MS Dock 1 power supply
MS Dock 2 power supply
Print two brackets as follows:
PETG material (ABS/ASA OK - PLA not recommended)
No supports
15% infill
0.25mm or 0.2mm layer height
You will need 4x washers and 4x 5/8" #10 screws to mount these to a wooden desk. You can also use M4 screws, nuts and washers to mount this to a VESA NUC extension plate behind your monitor, but that approach is more cumbersome and not recommended for most users.
Edit: By request, I've made a stacked version of the brackets that lets you hold the Dock + PSU together. This is an un-tested model so use with caution