Caliburn 4 (C4) - Homemade Nerf Blaster Metric Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Metric Remix of the C4 by Captain Slug. Hardware sourced in South Africa.
- Ocena
- 0 / 5
- Polubienia
- 40
- Pobrania
- 162
- Wydruki
- 1
- Wyświetlenia
- 1705
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Shipping hardware units from USA to South Africa proved too expensive. We decided to modify the files using the STEP files provided by Captain Slug to allow us to use hardware that we can easily source in our country (and hopefully others as well).
The assembly process is exactly the same apart from the imperial hardware replacements that we used. They should look very similar though. Here is a BOM:
| Hardware Description | QTY |
| M3x10 Hex Countersunk | 33 |
| Extension Spring 14mmx5mm | 2 |
| Nylon Spacer 20mmx5mm | 1 |
| Steel pin 1x18mm | 2 |
| 3mm Bungee Cord 20cm | 1 |
| Short Standoff M3x4mm | 5 |
| Long Standoff M3x40mm | 1 |
| Rubber Grommet 3.2mm ID | 1 |
| M5 Nut | 10 |
| M5x6 Hex Dome | 14 |
| M5x50 Hex Dome | 6 |
| M5x30 Socket Cap | 1 |
| M5 Locknut (Nyloc) | 3 |
| M5 Acorn Nut | 1 |
Printing Instructions:
Most of the files can be printed with 3 walls and 20% infill. However the following items we tend to do as 100% infill (solid)
- C19_4Trigger
- C22_4Sear
- C25_4PlungerE1
- C26_4PlungerE2
- C28_RamB
- C29_RamF
You can of course use your own discretion. Also note that we have not printed any blasters out of PLA since the South African summers are quote rough. We prefer SBS, PETG or ABS.