1 / 3
Caliburn 4 (C4) - Homemade Nerf Blaster Metric Remix — image 1
1 / 3

Caliburn 4 (C4) - Homemade Nerf Blaster Metric Remix

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Metric Remix of the C4 by Captain Slug. Hardware sourced in South Africa.

Rating
0 / 5
Likes
40
Downloads
162
Makes
1
Views
1,705
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Shipping hardware units from USA to South Africa proved too expensive. We decided to modify the files using the STEP files provided by Captain Slug to allow us to use hardware that we can easily source in our country (and hopefully others as well).

The assembly process is exactly the same apart from the imperial hardware replacements that we used. They should look very similar though. Here is a BOM:

Hardware DescriptionQTY
M3x10 Hex Countersunk33
Extension Spring 14mmx5mm2
Nylon Spacer 20mmx5mm1
Steel pin 1x18mm2
3mm Bungee Cord 20cm1
Short Standoff M3x4mm5
Long Standoff M3x40mm1
Rubber Grommet 3.2mm ID1
M5 Nut10
M5x6 Hex Dome14
M5x50 Hex Dome6
M5x30 Socket Cap1
M5 Locknut (Nyloc)3
M5 Acorn Nut1

 

Printing Instructions:

Most of the files can be printed with 3 walls and 20% infill. However the following items we tend to do as 100% infill (solid)

  • C19_4Trigger
  • C22_4Sear
  • C25_4PlungerE1
  • C26_4PlungerE2
  • C28_RamB
  • C29_RamF

You can of course use your own discretion. Also note that we have not printed any blasters out of PLA since the South African summers are quote rough. We prefer SBS, PETG or ABS.

Tags