Headphone Stand With Wood Elements
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An headphone stand to put on a desk, the base has a small tray for change and other little things.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 106
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
An headphone stand with wood elements with a base that features a small tray for change and small things. The base can be printed without top and bottom layers for that honeycomb look. I included the FreeCAD file so it can be modified to have a bigger base or different wood thickness. The one in the picture is my first pair of headphone ever, I really wanted to make a stand for them. Also my first FreeCAD model (all other before this one were made in blender), I used the new 1.0 version with the new assembly workbench, it was good practice.
The wood strips are 155 mm x 40 mm x 10 mm for the longer one and 70 mm x 40 mm x 10 mm for the shorter one. The tolerances on the fitting are quite relaxed, so no need for too much precision while cutting, but glue will be needed for the assembly.
Assembly Suggestions
Printing should be straightforward, no supports are needed except for the top part. For the assembly I used a generous amount of hot glue and it's rock solid.