Guitar Pick Holder with Sponge Spring
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a lower-profile guitar pick dispenser that can hold several picks. Print the 3 parts; Take a cleaning sponge…
- Ocena
- 5 / 5
- Polubienia
- 87
- Pobrania
- 496
- Wydruki
- 11
- Wyświetlenia
- 2365
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a lower-profile guitar pick dispenser that can hold several picks.
- Print the 3 parts;
- Take a cleaning sponge and cut it in a triangle shape (it will act as a spring that pushes the picks out);
- Put the triangle-cut sponge in the "base" part, put the "piston" part above it, and cover it with the "body" part;
- Use a few tiny drops of super-glue to glue the base and the body together.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
No
Supports:
Yes
0.20
Infill:
20%
Be careful when slicing, to ensure uniform lines in the perimeters of the body. The lines should be continuous (top photo), rather than split in several segments (bottom photo). In order to achieve that, you should try enabling theDetect thin walls option (inSlic3r), or experiment with the perimeter width a bit, until you achieve the contiguous perimeters.
Contiguous perimeters - OK!
Segmented perimeters - BAD!
Category: Music