Liczymy pasujące modele…
I have been using these handles on my CI and MP picks and love them. Got the Reaper set and decided to modify them to fit it. They should be a snug fit and go on about 50% freely. Once u hit that spot use a lighter or hair dyer to warm…
I had the instrument cluster speaker go out on my 2018 Tiguan. The speaker is what makes the blinkers click sounds and seatbelt dings and whatnot. In addition to not being able to hear alerts and the blinkers, the car will also disable…
This is a stand and dust cover that combine into a case (similar to the original Kontrol Stand). The stand brings the controller up to standard mixer height (such as Pioneer DJM mixers). It will fit the Traktor Kontrol X1, X1 MK2, F1, and…
Blank instrument bezel, you can design a file for whatever holes you need and use it as a modifier in the slicer to customize
Easily modifiable HSW Honeycomb Storage Wall Powertools, instrument holder or just a box. Pegs are adjusted automatically depending of the box size and you can choose in a 3x3 grid which ones to enable. Under Change parameters you can…
Designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral:…
I wanted a case to hold the 7 key set to keep the keys easily accessible, and a key ring was not working. There is a standalone case to hold the 7 keys and 2-3 rubber rings. There is a tight fitting cover that works well if you have a…
This is a flexible panel that sits at the bottom of the instrument cluster right above the steering wheel. My original one was deteriorating a bit and I reverse engineered it and came up with this. Some of the small holes may be off…
This is (almost) fully 3d printed mbira/kalimba musical instrument, just need some glue, screws/nuts for assembly! The sound is low but can be heard, good for practicing or playing alone without disturbing anyone and getting into trouble.…
Update: Glued tubes into base with UV resin, now they don't slide and keeping membrane tension, later considering to do snap fit type. This is some fully playable musical instrument, i found similar ones but made it differently to be…
This is a scan of a Honda VF750F RC15 instrument cluster. It mostly covers the top surface and the mounting "ears". The goal of the scan is to design a custom enclosure for a Naked Bike conversion.
I bought a set of 10 needle files, and also got a needle rasp, and wanted to hold them all up. They were narrower and I use them less than my screwdrivers, so I took inspiration from/modified my other screwdriver stand: and crammed them…
This will Fit most Mixers with a 53mm crossfader, including the Pioneer DJM-900 Series, and the DDJ- SZ and SZ2 as well. (
A model of a rack for auxiliary percussion instruments. Includes bass drum.
You can connect your panel conveniently to the fuse box just below the panel.
Chart your course with this detailed Antique Compass Rose model, inspired by classic maritime and explorer-era navigation instruments. Featuring a bold eight-point star at its centre, engraved directional markers, and layered circular…
Bring stage presence to your collection with this detailed Electric Bass Guitar model. Designed with a modern double-cutaway body shape, this sculpt captures the bold silhouette and functional layout of a classic four-string bass. The…
I designed this part to hold my amp stand securely to a dolly made from 1x3 pine and a $5 set of casters from Menards. This piece fits over a 1x3 end, and screws are used to hold the caster and the printed part to the 1x3. Many pipe style…
The original instrument panel for the MD7A(/MD7B is getting old. Mine was breaking apart by itself. This is an "almost drop in" replacement that reuse some of the old parts from my boat - possibly not possible with someone else's boat,…
Hallo Maker, hier ein Halter für 85mm Instrumente für Boote, Camper etc... Der Durchmesser ist so bemessen, dass die Instrumente mit dem mitgelieferten Gewindering gekontert werden können.
It fits the following as I have tested on my own... D'Addario/Planet Waves cables with the Geo-tips Ernie Ball Users report it also fits the following... Some Fender cables (see user comments)
Not sure if strikes the right tone, but for sure it is loud. This 3D Printed slide whistle will bring some fun. A quick two hour print (it don't needs support but some sanding may be required Inspired by the this Prusa Blog Print a…
Introduction: I f you decide to learn to locksmith, ( and I suggest you don't ), you will likely encounter many small microscopic parts that attempt to dissappear into the ether right before your very eyes. They are there one minute, and…
Multi purpose PC simulator instrument. 3 ways to place dials or buttons, blind caps to close unused holes. Module fits Saitek / Honeycomb yoke and throttle qudrant and can be mixed with components for these. Use 7mm standard dials and…
The Printables version will not be updated. The best place to get it is here: https://captainbobsim.com/product/the-cessna-172-project-files/?customize_changeset_uuid= Kit can be purchased here:…
This is a Ti-84 plus C graphic calculator made by Texas Instruments in 2013. It looked interesting so i decided to recreate it. The text might not be visible unless you have a multi-color printer (obv.). It has no butt, would've made it…
The Mr. Frog Percussion Instrument is a unique and fun musical toy designed for kids and adults alike. Made from high-quality wood, it features a frog-shaped design with ridges on its back. By using the included stick to rub along the…
Ornament of musical instrument - CIMBALOM Multicolor by layers (simple extruder)
This multi-holder attaches to any solid base using a standard clamp. Its use will make it easier to organize a workplace for repairing and setting up electronic equipment in any place, even the most inconvenient one. Rubber gaskets must…
Full details and a build guide is on Instructables! Electric Musical Instrument 3D Printed Amplifier . Print with your favourite thermoplastic | http://e3d-online.com/All-Filament Love 3D printing? Love T-Shirts? Then you need to check…
I have been using these handles on my CI and MP picks and love them. Got the Reaper set and decided to modify them to fit it. They should be a snug fit and go on about 50% freely. Once u hit that spot use a lighter or hair dyer to warm…
The design is inspired by an ancient Greek bullroarer. Instructions: Cut a piece of string that is at least 50 cm long. Take one end of the string and tie a knot around the bullroares hole. Ensure that the knot is tight with no clearance…
Here is a model of a large linked chain sized enough it can be worn as a necklace or used as a decoration. For printing, you will most likely need to add a brim for printing stability. A 3mm brim with 0.2 gap seemed to work fine. Also,…
This stand is designed primarily for the Texas Instruments Nspire line of calculators, but it will accommodate any Texas Instruments calculator with a thickness under 22mm. You can also scale the model, leaving around 1mm of tolerance on…
A riser that will nicely fit under your M32 so you can fit a full size keyboard underneath. Secure the riser with some tape using the lip. Print a pair obviously :)
Simple organizer for instruments (keys, screw driver, clog removing pin) I use with Flashforge Guider 2s which can be placed inside the Guider 2s. Don't take place, instruments are available right on place.
UPDATE: Added a pegboard version of this mount using Sy's Peglock System design. I picked up an AMES Instruments 12:1 infrared temperature gun from Harbor Freight (the $22 model) and couldn't find a stand or holster for it so I designed…
Bajonet NIKON/T2 pre CCD Moravian Instruments, distance 9, 10, 11 mm
I received my calc without cover so I made one. I have no idea what the original looks like and what features it has. Sorry. It has integrated supports for the slide in side of 0.4 thickness so you need to turn on single extrusion width…
This friction/pinch wheel replaces the original wheels that are now so old that they shatter when engaged to hold the paper against the roller. It has been designed using OpenSCAD and printed in TPU on a Anycubic Chiron printer. The…
Comfortable grip for Covert Instruments Echelon picks. Uses inexpensive 8x2mm magnets to snap onto sides of pick. Print one for each side and press-fit magnets, possibly with a drop of CA glue. Magnets: https://a.co/d/2O5zYB5
This spare part is one piece of the latch system for closing Trimble C-Series instrument cases used for DINI 03 digital levels. After surviving a minor accident with an empty instrument case this part broke on one of the cases from my…
I wanted to make a dulcimer-like instrument, but commercial mechanical tuning pegs were too expensive for me to buy like 64 of them; So I made this thing! Design and Objectives It is a simple worm gear-spur gear system that prevents…
These part replaces the two briggs from the dashboard for the instruments. Print Settings Printer: Prusa i3 MK3S (MMUS) Rafts: No Supports: No Resolution: .15 Infill: 15%
Un pequeño llavero que lo disfruten, Dejame tu lije y apoyo Podes invitame un café con mi alias emmauku.uala Cualquier falla del diseño reportarlo para su reparación, Gracias
I had the instrument cluster speaker go out on my 2018 Tiguan. The speaker is what makes the blinkers click sounds and seatbelt dings and whatnot. In addition to not being able to hear alerts and the blinkers, the car will also disable…
Click the ends of your ¼" cable together after wrapping the cable so your wrap stays put on the go. Prints in place with no supports needed.
In addition you need 3 screws M4x40 DIN912 and some stripes of flexible selftapping isolation (10 mm thick and 75 mm long).
I wanted one stand design that worked for multiple small instruments, so I designed this. Having my instruments quickly at hand makes me more likely to pick them up, instead of having them in their cases! I have tested it with a Nomad…
Bontempi Kids Instrument Key Bontempi Kids Saxophone, Clarinet and Trumpet Key Think the keys on all three are the same, and the tend to break. Already bought 2 of these kid instruments and my twins play indeed with them and start…
The 2nd iteration on a concept for a handheld MIDI instrument. It uses a Nunchuck and/or a magnetic rail to shift notes. Information: Everything was printed at a layer height of 0.2mm. In the right orientation, only the “Main” bodies…
The UAZ instrument panel extension is a frame for buttons, in regular places, you can also redo it for yourself
Einfach schnell ein paar Gewinde einschmelzen und einbauen. Verwendung auf eigene Gefahr.
This Instrument panel fits the 2.7m (106 Inch) version of the VQ-Model Pilatus PC-6 Porter. It replaces the ugly cockpit that comes with the ARF kit. The holes for the screens fit 1.8 inch arduino displays - you know what that means ;)…
These are simple clips intended to help keep surgical instrumentation jaws open during sterilization, based on some existing clips I saw at a previous job in central sterile processing. The included .scad file allows you to edit the…
This is a box for meteorological instruments (such as a thermometer or a hygrometer) that protects them from sunlight, water, snow, and strong winds. This box is based on a prior design I made and uploaded here . After days of frustration…
With Copycat i present the perfect weekend project - an Instrument for all ages and musical abilities with just two notes! More than a Toy, this percussion and rhythm instrument has many surprises and is a fun way to explore your rhythm…
This is a front cover for a Texas Nspire model of calculators, in case you scratched, lost, or broke yours. There is also a STEP file of the model here if you want to customize it with logos or anything else your heart desires. Feel free…
This is a stand and dust cover that combine into a case (similar to the original Kontrol Stand). The stand brings the controller up to standard mixer height (such as Pioneer DJM mixers). It will fit the Traktor Kontrol X1, X1 MK2, F1, and…
Blank instrument bezel, you can design a file for whatever holes you need and use it as a modifier in the slicer to customize
This is a snap fit case to hold water saturated sodium polyacrylate beads (also known as Orbeez). This device can help provide humidification to a small enclosed environment like a cigar humidor or musical instrument case. The saturated…
Just a simple design intended to be printed in vase mode/spiralized outer contour/etc as an imitation of standard tip protectors used during sterilization of surgical instruments. Required holes are included to allow steam/vapor to enter…
I needed a replacement cover for a TI-89 Titanium edition that I was selling on Facebook marketplace, so that the buyer would be satisfied. Luckily, I had another TI-84 calculator that still had its original cover so I could recreate one…
This free 3D model is based on Dorothy , the iconic weather research device from the 1996 film Twister . In the movie, storm chasers use Dorothy to deploy hundreds of small sensors into a tornado, hoping to study its inner workings and…
This is a 0.8 MOD gear 60T & 65T for the 2.5" & 3" Feather-Touch focuser of Starlight Instrument, that is intended to be used with Tilta Nucleus-M wireless lens motor (https://tilta.com/shop/nucleus-m-motor-kit-i/ ) for wireless focusing…
This is a 0.8 MOD gear 60T for the 2" Feather-Touch focuser of Starlight Instrument, that is intended to be used with Tilta Nucleus-M wireless lens motor (https://tilta.com/shop/nucleus-m-motor-kit-i/ ) for wireless focusing control, or…
This is a re-upload of this model , made by GlenH10, not me.
This is a picollo trombone but better because Cats the tail is optional as it get in your face you will need to glue the bell part 1, the bell part 2 and the nose and whiskers in order to assembeled them the UWU mouthpiece icluded works…
This is an oud this a short-neck lute-type, pear-shaped, fretless stringed instrument there is a thin one (easier to print less plastic and the one i printed) and a fat one (bigger and more close to a traditional one) you will need two 2…
Here is a duduk in C, it works with any duduk reeds. if you print it in 2 part you have to glue the two part to reduce any air leaks. Have Fun ! Category: Music
Hello This is a straight version of a bass serpent however in soprano size. It has been modelled in Catia. The model had been cut to be printed in smaller part. it shoud work with any standart trombone mouthpiece. I will publish an…
Abdeckung für Instrumentenpanel 57mm für Flugzeuge und Luftsportgeräte Cover for instrumentpanel 57mm for aircraft
Abdeckung für Instrumentenpanel 57mm für Flugzeuge und Luftsportgeräte Cover for instrumentpanel 57mm for aircraft
Parametric model to hold multimeters and other instruments on Biltema Pegboard which has 12mm C-C hole spacing. Easy to modify in fusion, all relevant parameters can be modified from Change Parameters. Screw holes C-C distance is…
Print on the side with support on buildplate. Tested with PETG. Requires an M4 thread insert (5,1mm × 6,3mm). Put a thread on a 4mm x 4mm brass bar. A knurled nut M4 can be used as lock nut to allow easy adjustment. The brass bar will…
In English below. Ich habe das Gehäuse neu designt, da es nur für das CC26X2R1 Board zu groß war. Weiterhin habe ich die Öffnung für die GPIO Ports entfernt, welche als Zigbee Coordinator nicht benötigt werden. Um die GPIO Ports komplett…
This design is an add on to motorize a RWD stereotaxic manual instrument and drive it with a servomotor. I designed it to allow slow and regular probe insertions. It adapts to the stereotaxic arm, holds with two screws and can be easily…
This is a replacement blank to swap out the security module in a JZS171 dash finisher with either a blank one, or another of your choosing. In the STEP file, there is a body (not to be printed) that shows the space that you have clearance…
Double Ratchet (Řehtačka)–Traditional Easter Instrument Introducing our one-of-a-kind 3D printed double noisemaker, known in Czech as the dvojitá řehtačka and in English as the double ratchet or double rattle . This innovative tool boasts…
These switch covers for the Mercedes Sprinter W903 offer a snug, secure fit—requires firm pressure to install properly. Printed in ABS-GF with 3 walls, 15% gyroid infill. Supports optional, but recommended for best results. Available in 3…
This model is compatible with the lego system.
- replacment dampers for the instruments - slicer: Cura - printing material: Generic TPU Nozzle 220°C, Bed 50°C - printing orientation: flat, not supports
Easily modifiable HSW Honeycomb Storage Wall Powertools, instrument holder or just a box. Pegs are adjusted automatically depending of the box size and you can choose in a 3x3 grid which ones to enable. Under Change parameters you can…
Designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral:…
Designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral:…
Designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral:…
Designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral:…
Designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral:…
Designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral:…
Designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral:…
Designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral:…
Designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral:…
Designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral:…
This is designed to hold instrument cables on the wall or the side of a desk. I recommend printing without supports and using at least 4 perimeters with a .4mm nozzle.
This form emerges as the pinnacle of whistle craftsmanship. For all believers in the magic of sound, this sculpture was carefully designed to enhance every whistler's experience, whether you're a seasoned pro or a cheerful beginner. The…
