Native Instruments Kontrol X1 Stand, Dust Cover, and Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a stand and dust cover that combine into a case (similar to the original Kontrol Stand.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 114
- Wydruki
- 0
- Wyświetlenia
- 1187
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a stand and dust cover that combine into a case (similar to the original Kontrol Stand). The stand brings the controller up to standard mixer height (such as Pioneer DJM mixers). It will fit the Traktor Kontrol X1, X1 MK2, F1, and Z1 controllers.
Required Materials:
290g of filament
Rubber Feet (Optional)
3MF Notes:
Objects print on their sides.
Both 3MFs work on a 254X254 Millimeter Build Plate.
Version Notes:
V2.0 - Completely revamped design.
- Controller fits more snugly when used as a carry case.
- Stand is not flush with controller at the front, which is more aesthetically pleasing in use.
- Dust cover is not held in place internally, so that dust cover can be used in tight setups without an overhang.
1.2 - Added a version which can be printed as one piece on 254mmx254mm build plates.
1.1 - Adjusted interlocking design on both cover and stand. Removed extended tab from cover. Adjust height of friction pad that sits under feet of controller. Added bubble to create more rigidity when the controller is cased.
1.0 - Original