67 modeli
Sling Kontrol V1.1 "by" Qwerm A shameless ripoff of Subrev's Sling Control, a picatinny accessory that helps store your sling when not using your rifle. Changelog: -v1.1 Added looser fitting versions of the snap on version in order to…
Replacement knob for KORG nanoKONTROL2 Print instructions I recommend to print it in PETG with elephant foot compensation on. Infill 100% prints in about 15 minutes. No supports are needed but you might have to clean up the ceiling inside…
This is a quick little stand to hold up a Korg nanoKONTROL 2 up off the desktop. I use mine as an extended control surface for desktop stuff (volume, screen brightness, etc), so I wanted to have this right behind my keyboard. In case…
I started from the nanokontrol2 fader Cap uploaded by xantharian and I made a couple of simple changes. Be reassured, these fader caps work interchangeably on either version of the korg nanokontrol (1 or 2) Print instructions Category:…
Check Engine Keychain Motorkontrollleuchte Schlüsselanhänger Printed in Bambu PETG Purchasing or downloading this file does not give you the right to sell physical prints of this design. Commercial license is available for this design by…
The Traktor Kontrol F1 is a micro DJ controller dedicated to controlling Traktor Pro’s “Remix decks”. As I’ve gotten one of these puppies just recently, I knocked up a stand for it. It’s 3 seperate parts, printable on smaller 3D Printers…
Sling Kontrol - MLOK "by" Qwerm A shameless ripoff of Subrev's M-LOK Sling Control, a M-LOK accessory that helps store your sling when not using your rifle. Print orientation: Print everything on it's side. Settings used: Layer Height:…
Prints without supports, but supports could be useful anyway.
Just a control freak
-100% infill -PLA just super glue the two parts together (Have not done TPU yet)
Dock to house the Nanokontrol2. I used this with MidiMixer and the WaveLink plugin to control the Wavelink sofrtware from Elgato. I've modified the model slightly since I printed it but not tested it due to having a new setup now.…
This custom fader cap for the KORG NANO KONTROL 1 and 2 is specifically designed for live performances, offering a far more intuitive feel and significantly improved channel control. It provides better grip, smoother handling, and…
This is a Steam deck joystick extensions. Commonly known as KontrolFreeks. Takes about 1 and half hours to print. Seems to work fine on my steam deck and hasn't broken yet after 50 hrs of in game time. Printed with 0.08 ultrafine setting,…
The original Native Instruments Traktor Kontrol Stand was discontinued. I got a second-hand X1 MK2 and needed a stand that would match the Z2 mixer—so I made this one. It’s compatible with the Z1, and it should also work with the F1 and…
NI Traktor S3 DJ Controller Stand A simple two-piece stand for Native Instruments' Traktor Kontrol S3 DJ/Midi Controller. Raise your Traktor S3 to a more comfortable 15° inclination. Suggest purchasing 4 self-adhesive rubber pads to affix…
This is a holder for your Xbox controller that mounts to the underside of your desk using double-sided tape (I used 3M tape.) The controller joysticks slide in to hold it in place. Works with KontrolFreek thumbsticks. I used: 0.4mm layer…
Traktor Kontrol S4 MK3 Stand - Two Piece 331mm Will print on any printer with bed ≥ 180mm (e.g. Bambu A1 Mini) If you find the bowtie pins too loose/tight, adjust XY Contour Compensation (on the bowtie objects only) in your slicer by +/-…
Print the logo flat on the bed with supports for the rest of the controller. I added a pause after the logo to be able to change colors.
The "nanokontrol2 stand" is specifically crafted to enhance the user experience of the Korg nanoKONTROL 2, a compact and versatile MIDI controller. This stand raises the controller to a more ergonomic angle, improving accessibility and…
This is a stand and dust cover that combine into a case (similar to the original Kontrol Stand). The stand brings the controller up to standard mixer height (such as Pioneer DJM mixers). It will fit the Traktor Kontrol X1, X1 MK2, F1, and…
An edit for Josh Myer's stand with holes so they can be wall-mounted. I mount mine above my secondary keyboard for controlling voicemeeter on my steam setup. .blend included if you want to adjust the size of the holes using the cylinders…
Print it with precision settings with layer height as small as possible. My print: Layer height: 0,10mm Infill: 100% Supports/brim: no
This is a stand i designed to angle and fix my KORG nanoKONTROL2 to wooden desktop stand. It is now easily accessible and doesn't move around while using it. The stand is designed to be screwed into the wood (see pictures).
I made those stands for Native Instrument Kontrol S2 MK3 as tables are always too low! STL is plain, it is up to you to “infill” it with your pattern of choice. With PrusaSlicer, import STL and remove top and botom layer, set Perimeter to…
8,5mm über Schieneoberkante ist ein wichtiges Maß für Kupplungen und Schächte nach NEM 360 und 362 für Modellbahnen in H0 aber auch für meterspurige Schmalspurbahnen in H0m. Bei H0m wird teilweise statt 8,5mm eine Höhe von 6,5mm…
Suports: yes
I made these to have the faders more visually present in the dark. Therefore, I printed the faders with GlowInTheDark PLA Filament. The mounting holes on the bottom side took some experimenting before they exactly fit the Z1 faders. If…
Korg nanoKontrol2 holder for Arturia Keystep for my perfect DAW setup. You can use the original screws for attachment. Printer: Ender 3 V2 Filament: PLA Infill: 25% Duration: 2h per part Support: not necessary
A simple stand for nanoKontrol2 Midi controller. Print 2-off stands, one at either end of the controller. I ended up using double sided tape to hold these to my table so it didnt slide around when I used the sliders on the controller. The…
This custom knob for the KORG NANO KONTROL 1 and 2 is specially designed for live performances, making it easy to visually track the amount of mapped parameters at a glance. The clear indicator improves visibility on dark stages, while…
Purpose: Having modified my Bug-A-Salt with a Picatinny muzzle mount and stock adapter (see my other models), I wanted a usable Picatinny rail mount to use the awesome SlingKontrol sling holder that Qwerm uploaded:…
A simple little stand, I didn't like the angle that most others put it at since I have labels on the front of the Korg that can't be read if it is angled any more. Plus using the faders at a steeper angle feels odd to me. Placement of…
I created this case to be used as a mouse jiggler/mover. It was inspired by Nicek’s case, but I didn’t like the idea of using glue or magnets, so I designed it from scratch. The software for the mouse jiggler/mover is available here:…
Alternative knobs and faders for the KORG nanoKontrol 2 or anything else that follows a similar dimension. You can print them in different colors to "label" each channel. For more details and building process:…
It is recommended to make this with supports. But you need omit the support for the middle section, if you ignore this, you might have some trouble to remove the filament in it. Print Settings: 20% infill Supports: Yes
Ich habe mir einen Handlichen Kontroller konstruiert, der z.B. für die Steuerung des Märklin Drehkrans verwendet werden kann, abe rauch für andere passende Projekte Es werden 2 kleine 3mm Holzschrauben sowie eine art Knickschutztülle für…
Quick first version. Improvements may follow if I find them useful. Print two of them. One for each side. Tested with 0.3mm layer thickness on MK3S+. No supports needed.
This is a stand designed to hold 2 KORG nanoKONTROL2s. I found the original part on thingiverse and it has worked amazing, so much so that I wanted a second one! All I did was cut off the bottom holder part, flip it around, and attach it…
This model fits on standart 220x220 bed size printers when rotating the “part2” by 45 degrees I printed at .2 mm , 10% Gyroid, 3 walls and 0 top / bottom layers
Small desk stands which are used in a pair (2) to slightly raise the back of the Nanokontrol2 midi controller. This makes is easier to see and control the buttons, sliders and knobs. 2 x 4mm holes are present to create a rigid stand when…
Um die Kupplungen meiner Fahrzeuge auf eine einheitliche Höhe einzurichten benutze ich für TTm dieses Hilfsmittel
A riser that will nicely fit under your M32 so you can fit a full size keyboard underneath. Secure the riser with some tape using the lip. Print a pair obviously :)
Custom icons for NanoKontrol2 Dock. These are a bit wider as to be centered on the faders without any gaps.
Tankdeckel-Kappe-Öl-kontrollieren! Ist gedacht als eine Art "Denkzettel" um mal den Ölstand zu Prüfen denn welcher Ort ist dafür geeigneter als eine Tankstelle. Noch gibt es an Tankstellen neben Zigaretten, Brötchen, Bier, Chips,…
Dieses 3D-druckbare Kombigehäuse wurde für ein 3,3V RFID-Lesemodul und ein Summermodul konstruiert. Es eignet sich ideal für Mikrocontroller-Projekte mit RFID-Erkennung und akustischer Rückmeldung, z.B. Zugangskontrollen,…
This cover is designed for the KORG NANO2 SERIES. It may also be compatible with first-generation KORG NANO devices. The cover protects your controller from dust, dirt, and minor impacts while not in use and is made to work perfectly with…
A stand/riser for the Korg NanoKontrol 2, slides snugly on to the beveled edge so it's nice and stable. 2 required. At least 10% infill, no supports required.
NanoKONTROL2 Angled Holders A simple and ergonomic stand for the Korg NanoKONTROL2 , designed to tilt the controller for better accessibility. Ideal for music production, studio setups, and live performances. Easy to print and use!
Recommended to print with PETG with infill >30%
Created this for a Mixing Station controller rig. Needed a flat mount for the controllers, as I am using the rig mobile, holding it with one hand. The iPad Air and nanoKontrol2 holder can be found here .
# 🦌 Weihnachts-Hirsch – Vorfreude außer Kontrolle! 🎄🎅 Wenn die Weihnachtsfreude einfach zu groß wird! 🎁✨ Dieser Hirsch kann es kaum noch erwarten! Weihnachten steht vor der Tür, die Geschenke sind verpackt, die Lichter leuchten und…
Dostaly jsme nové služební auta VW T-6.1, ale jsou zde přidané v kabině řidiče kontrolky pásů, které řidiče oslňují. Jelikož je to služební vůz a nechci nikde nic lepit nebo nějak upravovat, rozhodl jsem se vymodelovat krytku, která se…
Raised conteoller sides so keyboard fits under it. At the end I have decided to use it as a routing template, and make the sides out of the Multiplex. Not real wood, but still looks better than printed version.
Created this for a Mixing Station controller rig. Mounting an iPad Air and a nanoKontrol2 together. The dual nanoKontrol2 flat holder can be found here .
Ořech z jedné strany na zubatou matici a z druhé na přidržení, srovnání štítku kontrolky, vypínače, přepínače, či tlačítka. Doporučuji tisk z nějakého odolnějšího materiálu (minimálně PETG, lépe ASA) a výplň 60-70%. Socket for light,…
Lenkerhalter zur Befestungung eines Trail Tech Vapor Tachos direkt auf den Klemmböcken des Lenkers. Ideal bei Streetfighterumbauten um Platz zu sparen. Tacho wird von unten mit zwei Schrauben am Halter befestet. Halter selbst wiederum mit…
Eine Temperatur Kontrollbox für die Platine XY T01-4 um eine kleine Schaltzentrale neben dem Drucker einzurichten. Die Box ist steckbar und kann mit weiteren, gleichen Boxen, erweitert werden. Eine einfache Kabelführung seitlich…
>>YouPlaylisttube zu dieser Modell Beschreibung<< >> bilingual/english version availabe as PDF at github Der Pelletwächter ermöglicht es, den täglichen Pelletverbrauch einer Pelletheizung zur erfassen und anzuzeigen. Er warnt bevor die…
krabička pro kontroller z aliexpressu s LCD 50A . Dva závity M3 je nutno proříznout do plastu . Kryt na kabely/výfuk jsou dvě varianty . možno použít i držák na 3x3000F superkondenzátor 60mm průměr . Držáky jsou k sobě smontovýny m3…
Wird mit der Originalen Tachohalterung mitgeschraubt. Dafür muss einer der Vibrationsgummis etwas gekürzt werden.
This is a stand and dust cover that combine into a case (similar to the original Kontrol Stand). The stand brings the controller up to standard mixer height (such as Pioneer DJM mixers). It will fit the Traktor Kontrol X1, X1 MK2, F1, and…
This cover is designed for the KORG NANO2 SERIES. It may also be compatible with first-generation KORG NANO devices. The cover protects your controller from dust, dirt, and minor impacts while not in use and is made to work perfectly with…
Wird mit der Originalen Tachohalterung mitgeschraubt. Dafür muss einer der Vibrationsgummis etwas gekürzt werden.
Velkým knoflíkem se pohybujete rychle v menu, malým se pohybujete normálně + potvrzujete funkci. Použil jsem oboustranou lepenku k přilepení. Celé jsem to slepil vteřinovým lepidlem. Průměr díry na malém kolečku je 6mm.
