Instrument cable holder / BOSS KATANA corner replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Instrument Cable holder that can be replaced for the corner pieces on Boss katana 50, 100 and others from katana series
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 124
- Wydruki
- 1
- Wyświetlenia
- 1091
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
The design consists of two to three models depending on how you want to print the design. As shown in the picture below the main red body is attached to the amplifier by the original two screws. Then the rails in turquoise color are meant to be glued to the predestinated slots. The yellow clips are free to move in and out of the rails. Clips are designed to hold my Fender audio cables which are 7,5mm in diameter. The last model provided in Model Files is the main body with the rails already attached to it so you don't have to glue anything, but you will need supports when printing the model.
This design holds up to three cables and for now, I'm only providing a clip for a cable with 7,5 mm in diameter. If you need more rails or a bigger clip diameter contact me and I will be glad to edit the design for you.