Fat Bike Fender Elements first draft
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Work in Progress of a 26" fatbike fender. Soon there should be internal slots to improve glueing(bolting) together…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 610
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Work in Progress of a 26" fatbike fender. Soon there should be internal slots to improve glueing(bolting) together several elements to make a complete fender...
Rev 02 features holes for 5mm alignment pins and channels for M3 threaded rods (possibly even M4), to give the fender assembly some strength...
added a version modified with cutouts to fit between front forks (122mm clearance as currently scaled)
added 10 and 20 degree elements - the idea is to be able to adapt the extension before and behind mount points or obstacles, or to maximize the length of available threaded rods.
I have received stainless steel M3 1 meter rods now each weighs aprox. 43 grams and it looks like its going to fulfil the requirement to pretension and tighten the whole assembly even without glue!
Category: DIY