Ender 3 Neo / V2 - BTT U2C (2.1) Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
BTT U2C V2.1 enclosure for Ender 3 Neo / V2
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 131
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
U2C v2.1 enclosure for Ender 3 Neo / V2, inspired by orestes' design, but made from scratch entirely.
I made the model back in '24, but forgot to publish the model. Been using it ever since with no issues.
Started the design with a magnetic lid but 4x2 magnets were too weak to hold the lid closed against the force of the CAN cable moving, so I removed the magnet version.
6x3 magnets might be strong enough, but I did not test this. If you want to test it, let me know, and I'll make the 6x3 version.
The model is compatible with Ender 3 V2 and Ender 3 Neo.
BOM:
- M3x4x5 heatset inserts: 6 pcs + 4 pcs if using bolts version
- M3 x 6 mm Bolts: 12 pcs
- 4x2 mm magnets: 8 pcs if using magnets version
- M3 x 12 Bolts: 4 pcs if using bolts version
- M3 T-Nuts/Hammer Nuts: 6 pcs