The GlenCairrier
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A storage container for Glencairns, mini-glens, and other similar whiskey enjoying glasses.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 168
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
This is storage solution that can hold up to 16 Glencairns or similarly shaped glasses. Included in this project is a mini-glencairn adapter.
In the four corners of the lid and container body are holes where 5x2mm magnets can be inserted to secure the lid better (eight magnets used in total).
I printed this on a Bambu Lab P1S so I had to chop the bigger parts into four pieces. This is why there is a file called Lid_Brace.stl. It sits in the middle of the lid to stabilize the 4 pieces. Affix using your preferred PLA bonding material (I used CA glue).
As for print settings, 10% Rectilinear infill worked well for me. The MiniCairn_Adapter.stl piece could use supports, there is some overhang.