The GlenCairrier
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A storage container for Glencairns, mini-glens, and other similar whiskey enjoying glasses.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 168
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
This is storage solution that can hold up to 16 Glencairns or similarly shaped glasses. Included in this project is a mini-glencairn adapter.
In the four corners of the lid and container body are holes where 5x2mm magnets can be inserted to secure the lid better (eight magnets used in total).
I printed this on a Bambu Lab P1S so I had to chop the bigger parts into four pieces. This is why there is a file called Lid_Brace.stl. It sits in the middle of the lid to stabilize the 4 pieces. Affix using your preferred PLA bonding material (I used CA glue).
As for print settings, 10% Rectilinear infill worked well for me. The MiniCairn_Adapter.stl piece could use supports, there is some overhang.