1 / 5
Creality K1 Foot adapter (K1, K1C, K1-Max)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lost a foot adapter and needed one so i created a 1-1 from the original.
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 270
- Wydruki
- 2
- Wyświetlenia
- 1853
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (1)Kolekcje (79)Powiązane
This is a 1-1 of the original that i made quick because i lost one of the foot adapters.
I used TPU but have tested in PLA and it works the same
Infill 25% for 85A TPU and 18% for 95A TPU
Infill 15% for PLA
Print with support in the orientation that the model is prepared in