1 / 3
Remix of Future Towel Hook -kleinere Version/ smaller version — zdjęcie 1
1 / 3

Remix of Future Towel Hook -kleinere Version/ smaller version

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Verkleinerte Version von Future Towel Hook/ Reduced version of Future Towel Hook

Ocena
0 / 5
Polubienia
4
Pobrania
17
Wydruki
0
Wyświetlenia
137
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution

Durchmesser: 50mm
Höhe: 30mm

Deckel.stl und Unterteil.stl sind in PETG, Innenteil.stl in TPU gedruckt. Die Schichthöhe sollte 0,2mm sein. Zur Montage wird Deckel mit etwas Sekundenkleber auf Unterteil geklebt. Wichtig: Nicht vergessen Innenteil dazwischen zu legen.

Befestigt wird das Modell mittels Powerstrips.

 

Translation: DeepL

Diameter: 50mm
Height: 30mm

Deckel.stl and Unterteil.stl are printed in PETG, Innentei.stl in TPU. The layer height should be 0.2mm. For assembly, the Deckel is glued to the Unterteil with a little superglue. Important: Do not forget to place the Innenteil in between.

The model is attached using Powerstrips. 

Tagi