Bosch Colt 1 HP Guide Bushing Sub-base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 6" round sub-base for a Bosch Colt 1 HP PV20EVS router designed to accept the Harbor Freight brass guide…
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 59
- Wydruki
- 1
- Wyświetlenia
- 301
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
This is a 6" round sub-base for a Bosch Colt 1 HP PV20EVS router designed to accept the Harbor Freight brass guide bushings. It works with the stock fixed base. It may work on other routers or with other guide bushings, but this is what I modeled it after.
Note that Bosch designed the router base so the center hole is not centered with the screw pattern. It's pretty obvious which way is correct when you put it on.
I printed this at 0.2 mm, 3 walls, and 25% lines infill. You could probably get away with less infill.
Let me know if it doesn't work for your application and I could potentially make changes.
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 Max
**Rafts:**
No
Supports:
No
**Resolution:**
0.2
Infill:
25%
**Filament:** eSun PLA+ Fire Engine Red
Category: Parts