Medal holder - mountain version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A medal holder to hang on your wall, made out of 4 parts that can be mounted without glue or screws!
- Ocena
- 3,5 / 5
- Polubienia
- 38
- Pobrania
- 260
- Wydruki
- 2
- Wyświetlenia
- 1061
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a medal holder that you can hang on your wall. Is made out of 4 parts, that can be mounted without glue or screws, just interference (there is a lot of interference, but if you push enough, you will be able to assemble it).
I printed it with my Bambulab A1, and the dimensions of the single parts are: 17,7 x 23,9 cm
The whole holder is 48 x 26,9 cm
You must print it using supports, between the parts where the 4 pieces are going to join. Be careful, remove all the excess otherwise you are going to have problems while mouting it.
To hang on the wall you need this type of hooks: https://lc.cx/IwnjzK
If you have problems, contact me! If you like it, leave a like and a comment, thanks :)