1 / 2
Aurasound/Dayton Audio Bass Shaker 8020 Mounts — zdjęcie 1
1 / 2

Aurasound/Dayton Audio Bass Shaker 8020 Mounts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Allows mounting of a bass shaker to 8020 (1515/1530) extruded aluminum

Ocena
5 / 5
Polubienia
18
Pobrania
165
Wydruki
1
Wyświetlenia
1153
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Allows for mounting an Aurasound or Dayton Audio bass shaker on extruded aluminum.  My shakers have holes for M5 bolts, and I used M5 heat set inserts to hold them in place to the mount.

I've included STLs for both M5 and M4 shaker mounts, and the included STEP files, just make sure you pick the right one for your application.

You will also need to use the “button style” 5/16" bolts to mount the centre mount plate to your rig as the socket cap would sit proud and not allow for the shaker to sit flat.

There are three styles:

  • Center mount, which you would bolt the plate to your rig, and then bolt the shaker to the plate afterward as the rig mounts are underneath the shaker.
  • Flat mount, which mounts to the rig behind the shaker
  • Two-sided mount, which bolts to to sides of the 8020 for a stiffer fit.

I use the center and flat mounts on my rig, and they've been working fine.  You do need to print with a high infill and high wall count (I used 80% infill and 5 walls), as you want it to be pretty dense to transfer through the vibrations.  They've held up well for the past couple of months.

Tagi