Diamond Vase #CutVase Spiral Mode
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A vase with a cutout, which prints in spiral vasemode.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 137
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Standard Digital File License
Diamond Vase
This is my third #Cutvase, a modern Vase with diamond pattern and a diamond Cutout. This Vase is special and innovative!
It seems impossible to print properly in Vasemode, because of the cutout and the bevel top.
Through a little cut on the side i made it possible to print with “Spiral Vase” option. The benefits of it, perfect layer lines, no retraction and watertight.
With the little cut you will get 2 lines each with 0,6mm for an 1,2mm wall thickness which makes it stable.
The Vase is 150mm height and prints in under 2 hours. (Fuzzy Skin on Plate 2 takes longer)
Printing:
- Spiral Vase Mode on✅
- No Smooth Spiral ❌
- In my filament profile i increased the flow, to ensure lines melt together at the cut. Use the 104% Flow PLA Profile or increase it in your filament profile
I did a bunch of test prints and they stay watertight! (under drip cutout 😅)
I will add some more #Cutvases in the feature → like to follow me✔
Happy Printing👍 and thanks for supporting me 😉
Commercial license, Mods and more you can get here: