AKG K7xx Headband Restoration "Covers"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Things to put together an AKG K7xx headband assembly.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 335
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print everything twice for a full set.
You can add L and R indicators on the preferred covers with the “Add negative volume” option in your slicer if you wish. AKG shipped these with L and R on what is similar to the TopOutside model.
Might need to use some glue if the “inside” models are too small. If they're too big, cut at 1mm z height, change x and y size (but not z!) and re-align the two new parts (don't forget to add 1mm to the z height on the cylinder).
Works with other 3D models related to the AKG K7xx headband.
Image shows the following other models:
- AKG K702 headband attachment (slider)
- AKG AKG K7XX Elastic Bands/Straps Fix
- AKG K7XX Headband (mounting plates between slider and leather)