1 / 1
AKG K7xx Headband Restoration "Covers"
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Things to put together an AKG K7xx headband assembly.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 37
- Makes
- 0
- Views
- 335
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print everything twice for a full set.
You can add L and R indicators on the preferred covers with the “Add negative volume” option in your slicer if you wish. AKG shipped these with L and R on what is similar to the TopOutside model.
Might need to use some glue if the “inside” models are too small. If they're too big, cut at 1mm z height, change x and y size (but not z!) and re-align the two new parts (don't forget to add 1mm to the z height on the cylinder).
Works with other 3D models related to the AKG K7xx headband.
Image shows the following other models:
- AKG K702 headband attachment (slider)
- AKG AKG K7XX Elastic Bands/Straps Fix
- AKG K7XX Headband (mounting plates between slider and leather)