1 / 2
Mast mount for Lora/Meshtastic Fiberglass Antenna (5.5dbi/12dbi) — zdjęcie 1
1 / 2

Mast mount for Lora/Meshtastic Fiberglass Antenna (5.5dbi/12dbi)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount your fiberglass antenna to a 35mm diameter antenna mast or pole

Ocena
0 / 5
Polubienia
26
Pobrania
118
Wydruki
0
Wyświetlenia
1051
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Uses 2 hose clamps to mount this bracket to a 35mm diameter antenna mast.

The pictured 868 MHz antenna is 550mm long and has 12dBi gain. Link

Dimensions:

  • 22.8mm diameter inside
  • 22.2mm diameter bottom lip
  • 35mm diameter mast side
  • 9mm wide channels for zip-ties or hose clamps

Tight fit! Consider scaling up when printing with shrinking materials (I used 100.5% with ABS to get a perfect result on a well calibrated printer)

 

Part of the following meshtastic solar node model set:

Tagi