1 / 6
MagSafe iPhone + Apple Watch Charging Station - Floating Puck
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sleek charging station that supports MagSafe and Apple Watch chargers
- Ocena
- 0 / 5
- Polubienia
- 1
- Wydruki
- 0
- Wyświetlenia
- 147
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
This is a modern, sleek charging station for your MagSafe and Apple devices that looks great even when not charging anything!
Assembly
- Just slot the charging portion onto the base
- NOTE: The tolerance between the pillar and the slot is 0.15mm, this prints and goes together well with my Bambu X1C.
- If you are having trouble getting the 2 pieces to slot together, please try the “0.2mm” or “0.25mm” models which have a looser tolerance.
Printing
- Layer height: 0.2mm - 0.3mm
- Infill: 10%
- Walls: 3
- Support: Organic
- Tip: I'd add a “Modifier” to the “base” of the base model and set infill to 100%
- This adds some additional weight to the base
Features
- VHB tape cutouts on the base
- Cutouts for 12.9x3.5mm rubber bumpers
Don't know which MagSafe charger you have? Check out our blog post about it: https://www.bakedbean3d.com/tutorials-and-guides/how-to-tell-which-magsafe-charger-you-have
Note: I highly recommend you use the VHB tape cutouts on the bottom of the base!
Happy printing!