Mazda Miata Door Pull (NA)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Mazda Miata Door Pull (NA)
Porsche-style door pulls for your NA Miata This is a snap-style cap and base that does not require any hardware to hold the cap.
Additional Resources needed:
Adding your color webbing strip for color personalization, the shortest length suggested is 14" as you want enough material to create a loop of 6" and an additional 2" for 1" overlaps for the eye loop to create a little webbing sandwich. Use a 7/8" washer to help keep everything tight.
Use a hot knife or similar tool to create the holes needed in webbing. This will seal the webbing and prevent fraying.
2 ea 7/8" flat washers
36" of color webbing can be bought at most local craft stores
Print settings:
Use PETG or ABS or ASA or stronger material with better heat resistance.
Layer Height: 0.20mm base with variable layer height
Perimeters: 3
Infill: 15% Gyroid
Support: Required