Mazda Miata Door Pull (NA)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Porsche Style Door Pulls
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 69
- Makes
- 0
- Views
- 511
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Mazda Miata Door Pull (NA)
Porsche-style door pulls for your NA Miata This is a snap-style cap and base that does not require any hardware to hold the cap.
Additional Resources needed:
Adding your color webbing strip for color personalization, the shortest length suggested is 14" as you want enough material to create a loop of 6" and an additional 2" for 1" overlaps for the eye loop to create a little webbing sandwich. Use a 7/8" washer to help keep everything tight.
Use a hot knife or similar tool to create the holes needed in webbing. This will seal the webbing and prevent fraying.
2 ea 7/8" flat washers
36" of color webbing can be bought at most local craft stores
Print settings:
Use PETG or ABS or ASA or stronger material with better heat resistance.
Layer Height: 0.20mm base with variable layer height
Perimeters: 3
Infill: 15% Gyroid
Support: Required