Huawei Inverter SUN2000 Fanduct - Up To 3x 120 mm Fans - Parametric (Remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fan duct to keep your Huawei inverter SUN2000 cool. .stl and .step files for 4x 80x80 and 3x 120x120 fans are premade.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 550
- Wydruki
- 1
- Wyświetlenia
- 1971
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The parametric Autodesk Fusion file can be modified to fit your exact fan size. Excluding the air blocker plate, the model prints in four different pieces.
STL files and hardware:
Fit 80x80 mm and 120x120 mm fans.
To mount the fans four M4x30 or M4x35 screws per fan are needed.
The fan duct gets mounted to the SUN2000 inverter by four M6x5 screws, two on either side. When using washers use M6x10s.
Poke-throug holes are included for ziptie cable management.
An air blocker plate to block empty fan spots is included.