Liczymy pasujące modele…
Wall Grid Cover "Honeycomb Design" - 120x120mm / 150x256mm / 150x236mm / Ø120mm - Griglia di copertura Nido d' Ape Resize/Scale to adjust dimension 03/01/2025 added Honeycomb Grid Cover Ø120MM 17/01/2025 added Honeycomb Grid Cover…
Nests in drawer indentations and has a chamfered base to easily grab small parts from the bottom. I
What is it? Mount for a standard 120x120mm computer case cooling fan. Slides into the top of a ~129x129mm cutout at the top middle of the rear acrylic sheet for the Prusa IKEA Lack Enclosure. Why would you want a fan? Particularly with…
Крепление для установки вентилятора для охлаждения видеокарты Category: Electronics
Filter holder for Prusa Enclosure and rack server cabinets (120x120 fan). It is cheap, fast to make and simple as possible. Holder is designed for Zortrax filter set (Hepa + Carbon), but any square filters up to 27mm thick will fit. You…
Modifizierte Halterung für den originalen HEPA Filter von Prusa, passend für einen 120x120 Lüfter am originalen Ausgang hinten links. Statt des Umwälzens der Luft im Gehäuse, wird die warme Luft aus dem Gehäuse geblasen. Optional kann man…
I had this old aluminium cooler fan from a electric panel and reused it as an extractor for my airbrushing painting booth, but I needed and adaptor to connect a duct going to my window so I design this adapter to fit on a 120x120 cooler…
I bought one AC Infinity T3 ventilator and sawed out two openings in the back up of my Besta tv lowboard. First installed just an opening as in the photo, later added a second compatible usb 120x120 fan and added the model with the round…
A pivoting holder for 120mm Axial fans. Fits snuggly on 16mm grow tent poles. Uses 2x M3x15mm bolts and 2x M3 nuts Once you adjust the tightness on the holder, it will stay in place. With just enough torqon the bolts, you can pivot the…
This is a 120mm x 120mm x 40mm box and matching lid generated with my box generator software which you can find here: https://howtobuildabattery.com/BoxGenerator
This is my take on fume and dust extraction for my small workshop. It is parametric and can be adjusted with a bit of FreeCAD knowledge. Printing advice: use 0.6mm nozzle and 0.40mm layer height print in PETG for some flex and conformity,…
Case/holder K1 upgrade for active carbon filter (10mm two layers): Printed material: PLA/ABS/ASA supports required for case only. Filter can be purchase here: https://www.amazon.co.uk/dp/B07K9MN4QZ
This is a bed leveling test for Prima Creator p120 v4 (MP Select mini pro).
it is the same filter as here https://www.printables.com/de/model/541332-hepa-filter-holder-for-prusa-enclosure-and-rack-se from KFORMS I only fixed the stl in the first file. In the second file i added holes for pushing the filters out.…
Storage box with honeycomb pattern. Dimensions - 240x120x120mm (possible to change in a slicer) Printing I used a 0,4 mm nozzle, 0.20 layer height, 15% infill, perimeters - 2x, PLA. Without supports and multicolor.
This is an alignment template for the Husqvarna 120x120 embroidery hoop. Alignment notches on top, bottom and sides, horizontal and vertical cut-through centering lines and center dot. It's transparent so any underlying pattern can still…
Bu proje, basit bir lehim fanı/duman emici sisteminin 3D yazıcı ile üretilebilen tüm parçalarını içermektedir. Standart boyutlardaki bir fan motoruyla uyumlu olarak tasarlanmış bu parçalar, lehim yaparken ortaya çıkan dumanları…
quick adhesion layer test for the ender 3 v2 or other printers with a print bed with 125x125mm bed. its very useful, so i wanted to share.
A practical two-part container designed for storing garlic, onions, shallots, and small herbs inside the fridge. The set consists of: A 120x120 mm ventilated container with a honeycomb-patterned bottom for excellent air circulation. A…
I need a way to print faster and not suffer from cooling. I made this based off of the Creality K1 Max. It works well off of the mainboard of the printer. I use Klipper but can easily be made to work with marlin. I have a skr 2 board that…
Fan duct side panel mounted, this allowed me to remove the PCF on each toolhead of my toolchanger. Model has two bodies so that it does not go above 310mm tall and can be printed with no supports required. All holes utilise M3 & M4 heated…
found a big version online changes it to make make it a more stable version of it for 120x120mm for small plates to organize all the little plates
Base para ventilador 120x120 Category: Electronics
The bottom is designed for putting 3x m3 heatinserts. print mid plates so many you need. M3 screws needed :) how long? it depends how many mid plates you print for it. for 1x top 2x mid and 1 bottom you need m3x14mm screws every layer on…
Fan Cover for redirecting the airflow. 120x120mm works for Prusa Enclosure. Settings Value Infill 15% (adaptive cubic) Perimeters 2 Layer Height 0.15 mm Speed Material PETG (PLA) Supporting Material only overhangs / organic Comments…
Plastic tray on wall for worktable. Size 50x120x120
*Part list below * A simple DIY 5V USB-powered solder fume extractor with filter. Printed in 2 pieces. You only need to cut the wire and solder to the switch. You can also skip the soldering and just (un)plug the USB to power on/off .…
*Part list below * A simple DIY 5V USB-powered solder fume extractor with filter. Printed in 2 pieces. You only need to cut the wire and solder to the switch. You can also skip the soldering and just (un)plug the USB to power on/off .…
This build plate holder is designed for 120 × 120 mm build plates used with the Voron 0.1 / 0.2 . It provides a simple and organized way to store multiple build plates while keeping them separated to protect the surface coating (such as…
quick adhesion layer test for the ender 3 v2 or other printers with a print bed with 125x125mm bed. its very useful, so i wanted to share.
Fan filter holder with up to 2 different filters (like Hepa, coalfilter etc). Good for printing ASA, ABS etc. How to put together? Print base part, grid and additionally print second filter part. Glue it together and mount to the Ikea…
Wall Grid Cover "Honeycomb Design" - 120x120mm / 150x256mm / 150x236mm / Ø120mm - Griglia di copertura Nido d' Ape Resize/Scale to adjust dimension 03/01/2025 added Honeycomb Grid Cover Ø120MM 17/01/2025 added Honeycomb Grid Cover…
Follow the guide by @CreativeJE_213603 - https://youtu.be/2xLQ9wforAc building the fume extrator. fan I'm using, aviable in latin america (mercadolivre) - link fan available amazon USA - link IMPORTANT: Add a Negative part to make a…
I created this filter to hold carbon pellets for a 120x120mm fan. I printed in PLA but any material should work. No supports needed, but if your bed adhesion isn't the best, consider adding a brim. Please make sure you have good…
This project includes all the parts of a simple soldering fan/fume extractor system that can be 3D printed. Designed to fit a standard-sized fan motor, these parts filter soldering fumes, helping to create a healthier work environment. 🔧…
Had a bunch of 100x30mm filters on hand for the DELACK enclosure, built the Lack enclosure and used this passthrough exhaust design, but didn't want to buy filters until I had to. Designed in Solidworks, will probably work for other…
Added a lip to the hose mounting part for better fix
Náhradní krytka pro sifon podomítkový ke klimatizačním jednotkám HL138N DN 32
Print Guide: M5 x 30 screws and nuts partially supports! PETG! 0,4 nozzle 3 Walllines, 20% Gyroid infill pause print to insert the nut on “enclosed Nut” file, same for M5 screw The TentMod hinged PC fan module is an extension of the…
This build plate holder is designed for 120 × 120 mm build plates used with the Voron 0.1 / 0.2 . It provides a simple and organized way to store multiple build plates while keeping them separated to protect the surface coating (such as…
Ich habe mir einen Xilence I402 CPU Kühler gekauft dessen Lüfter leider relativ laut mit meinem Core I7 war. Einen 120er Lüfter hatte ich noch rumliegen, aber leider brauchte ich ne Halterung für die Montage. In der Vergangenheit habe ich…
Design Concept This storage box is designed to organize and store small items securely with a fitted lid. Its compartments are strategically arranged to offer convenient segregation and accessibility. ## Purpose Ideal for keeping small…
This is an adapter for 120x120x32mm blower fan to 20mm ID hose for remote part cooling system. V2 is a longer with a more gradual transition to lessen the turbulence.
Fan filter holder with up to 2 different filters (like Hepa, coalfilter etc). Good for printing ASA, ABS etc. How to put together? Print base part, grid and additionally print second filter part. Glue it together and mount to the Ikea…
There are plenty of enclosure fan/filter mounts out there, but I couldn't find exactly what I was looking for - maybe this will suit someone else's needs too! The body of the mount is fixed to the enclosure (in my case, a plywood box)…
Wall insert to be printed with pause for insert 6xM4 regular nuts
A simple duct to be connected to another duct, to be fixed to a 120x120 mm fan or to a connector which will be connected to another duct, flexible aluminum or rigid. This duct is 100 mm high , but there are others from 30 mm up to 340 mm…
A simple duct to be connected to another duct, to be fixed to a 120x120 mm fan or to a connector which will be connected to another duct, flexible aluminum or rigid. This duct is 34 0 mm high , but there are others from 30 mm up to 340 mm…
A simple duct to be connected to another duct, to be fixed to a 120x120 mm fan or to another duct, flexible aluminum or rigid. This duct is 30 mm high , but there are others from 100 mm up to 340 mm (which is the maximum height of my…
No support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is required here. Update 01: new photos (you can't see…
No support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is required here.
No support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is required here.
Remix of Rugged Box to 120x120x54 in Fusion 360 Uses 30mm M3.5 bolts Thicker hinges and supports
Hey, here you have another of my designs, this time it's my rugged box which you may use to store and protect whatever you want. May be one of the best things of this model is that this one is fully 3D printable. So, you are not gonna…
Another version of the riser. Now it is possible to replace the standard 92x92x15 mm fan with the more common 92x92x25 mm fan. Additionally, there is the option to install a 120x120x25 mm fan. I installed both fans, replacing the standard…
I needed a hoop for a Husqvarna Viking DesignerJade35, so I searched if anything was available but there is a big lack of models. So thanks to Matthias_hunziker I just needed to remodel the hoop and not the locking system. Print Settings…
