Search results: 120x120

Fan Grid 120x120

A beautifull fan grid 120x120 with hexgonal pattern

Wall Grid Cover "Honeycomb Design" 120x120mm / 150x256mm / 150x236mm / Ø120mm

Wall Grid Cover "Honeycomb Design" - 120x120mm / 150x256mm / 150x236mm / Ø120mm - Griglia di copertura Nido d' Ape Resize/Scale to adjust dimension 03/01/2025 added Honeycomb Grid Cover Ø120MM 17/01/2025 added Honeycomb Grid Cover…

NAS R1 R7 Topton Aoostar Kingnovy riser for 92x92x25mm and-or 120x120x25mm fans

Another version of the riser. Now it is possible to replace the standard 92x92x15 mm fan with the more common 92x92x25 mm fan. Additionally, there is the option to install a 120x120x25 mm fan. I installed both fans, replacing the standard…

SORTAINER SYS 4 TL-SORT/3 - BOXES - 60x60x71, 60x120x71, 120x120,71

Nests in drawer indentations and has a chamfered base to easily grab small parts from the bottom. I

120x120mm Fan Mount for Prusa IKEA Lack Enclosure

What is it? Mount for a standard 120x120mm computer case cooling fan. Slides into the top of a ~129x129mm cutout at the top middle of the rear acrylic sheet for the Prusa IKEA Lack Enclosure. Why would you want a fan? Particularly with…

PCI FAN FOR GPU 120x120

Крепление для установки вентилятора для охлаждения видеокарты Category: Electronics

120x120x54 Rugged Box

Remix of Rugged Box to 120x120x54 in Fusion 360 Uses 30mm M3.5 bolts Thicker hinges and supports

HEPA Filter holder for Prusa Enclosure and rack server cabinets (120x120 fan)

Filter holder for Prusa Enclosure and rack server cabinets (120x120 fan). It is cheap, fast to make and simple as possible. Holder is designed for Zortrax filter set (Hepa + Carbon), but any square filters up to 27mm thick will fit. You…

Rugged Box 120x120x70

Hey, here you have another of my designs, this time it's my rugged box which you may use to store and protect whatever you want. May be one of the best things of this model is that this one is fully 3D printable. So, you are not gonna…

BambuLab A1/A1 mini poop tray v2 (120x120x60mm)

A1/A1 mini poop tray

Prusa Enclosure HEPA Filtration 120x120 fan

Modifizierte Halterung für den originalen HEPA Filter von Prusa, passend für einen 120x120 Lüfter am originalen Ausgang hinten links. Statt des Umwälzens der Luft im Gehäuse, wird die warme Luft aus dem Gehäuse geblasen. Optional kann man…

Bonsai pot 10 hexagonal rounded (mame)_120x120x46mm

No support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is required here.

Embroidery square hoop 120x120mm Jade

I needed a hoop for a Husqvarna Viking DesignerJade35, so I searched if anything was available but there is a big lack of models. So thanks to Matthias_hunziker I just needed to remodel the hoop and not the locking system. Print Settings…

3 inch adapter for 120x120 cooler fan

I had this old aluminium cooler fan from a electric panel and reused it as an extractor for my airbrushing painting booth, but I needed and adaptor to connect a duct going to my window so I design this adapter to fit on a 120x120 cooler…

Cover for any 120x120 fan, in particular for AC Infinity 120x120 Airplate S3 / T3 / T8

I bought one AC Infinity T3 ventilator and sawed out two openings in the back up of my Besta tv lowboard. First installed just an opening as in the photo, later added a second compatible usb 120x120 fan and added the model with the round…

Fan Holder 120x120x25mm

Layer Height: 0.30mm Infill 20%

Pivoting Axial Fan Holder 120x120mm grow

A pivoting holder for 120mm Axial fans. Fits snuggly on 16mm grow tent poles. Uses 2x M3x15mm bolts and 2x M3 nuts Once you adjust the tightness on the holder, it will stay in place. With just enough torqon the bolts, you can pivot the…

Bonsai pot 06 round (mame) 120x120x42mm

No support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is required here. Update 01: new photos (you can't see…

Bonsai pot 14 hexagonal curved inwards (mame) 120x120x70mm

No support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is required here.

Box and Lid (120x120x40)

This is a 120mm x 120mm x 40mm box and matching lid generated with my box generator software which you can find here: https://howtobuildabattery.com/BoxGenerator

Soldering and Workshop Fume and Dust Extractor for 120x120mm Fan

This is my take on fume and dust extraction for my small workshop. It is parametric and can be adjusted with a bit of FreeCAD knowledge. Printing advice: use 0.6mm nozzle and 0.40mm layer height print in PETG for some flex and conformity,…

120x120x5 (two layers) active carbon K1 filter holder/cover

Case/holder K1 upgrade for active carbon filter (10mm two layers): Printed material: PLA/ABS/ASA supports required for case only. Filter can be purchase here: https://www.amazon.co.uk/dp/B07K9MN4QZ

bed level test 120x120x120

This is a bed leveling test for Prima Creator p120 v4 (MP Select mini pro).

120x120 fan fitting to KG100 pipe

Wall insert to be printed with pause for insert 6xM4 regular nuts

HEPA zortrax Filter holder for Enclosure and rack server cabinets (120x120 fan) remix

it is the same filter as here https://www.printables.com/de/model/541332-hepa-filter-holder-for-prusa-enclosure-and-rack-se from KFORMS I only fixed the stl in the first file. In the second file i added holes for pushing the filters out.…

Box honeycomb 240x120x120

Storage box with honeycomb pattern. Dimensions - 240x120x120mm (possible to change in a slicer) Printing I used a 0,4 mm nozzle, 0.20 layer height, 15% infill, perimeters - 2x, PLA. Without supports and multicolor.

Husqvarna Embroidery Template (120x120)

This is an alignment template for the Husqvarna 120x120 embroidery hoop. Alignment notches on top, bottom and sides, horizontal and vertical cut-through centering lines and center dot. It's transparent so any underlying pattern can still…

KendinYap - DIY Lehim Duman Emici ve Filtreleyici Fanı (Fan Boyutu 120x120x38)

Bu proje, basit bir lehim fanı/duman emici sisteminin 3D yazıcı ile üretilebilen tüm parçalarını içermektedir. Standart boyutlardaki bir fan motoruyla uyumlu olarak tasarlanmış bu parçalar, lehim yaparken ortaya çıkan dumanları…

1 layer adhesion test 120x120x0.2 mm Ender 3 v2

quick adhesion layer test for the ender 3 v2 or other printers with a print bed with 125x125mm bed. its very useful, so i wanted to share.

Fan 120x120 Holder

Fan 120x120 Holder

Fridge Container for Garlic, Onion & Shallots — Ventilated Box + Drip Tray 120x120 mm

A practical two-part container designed for storing garlic, onions, shallots, and small herbs inside the fridge. The set consists of: A 120x120 mm ventilated container with a honeycomb-patterned bottom for excellent air circulation. A…

Filter for 120x120mm fan

Fan filter holder with up to 2 different filters (like Hepa, coalfilter etc). Good for printing ASA, ABS etc. How to put together? Print base part, grid and additionally print second filter part. Glue it together and mount to the Ikea…

Enclosure mount for 120x120mm fan and filter

There are plenty of enclosure fan/filter mounts out there, but I couldn't find exactly what I was looking for - maybe this will suit someone else's needs too! The body of the mount is fixed to the enclosure (in my case, a plywood box)…

Fan Duct for 120x120x32mm

I need a way to print faster and not suffer from cooling. I made this based off of the Creality K1 Max. It works well off of the mainboard of the printer. I use Klipper but can easily be made to work with marlin. I have a skr 2 board that…

Redukce na větrák 120x120mm - průměr 100

Redukce na větrák 120x120mm - průměr 100

Aux Fan Duct 120x120

Fan duct side panel mounted, this allowed me to remove the PCF on each toolhead of my toolchanger. Model has two bodies so that it does not go above 310mm tall and can be printed with no supports required. All holes utilise M3 & M4 heated…

Pei holder 120x120mm

found a big version online changes it to make make it a more stable version of it for 120x120mm for small plates to organize all the little plates

120x120mm carbon filter

I created this filter to hold carbon pellets for a 120x120mm fan. I printed in PLA but any material should work. No supports needed, but if your bed adhesion isn't the best, consider adding a brim. Please make sure you have good…

Base para ventilador 120x120

Base para ventilador 120x120 Category: Electronics

Flex Bed Holder 120x120

Carbon filter housing for fan 120x120

Carbon filter housing for fan 120x120

120x120mm Fan Duct H 340mm and Connector

A simple duct to be connected to another duct, to be fixed to a 120x120 mm fan or to a connector which will be connected to another duct, flexible aluminum or rigid. This duct is 34 0 mm high , but there are others from 30 mm up to 340 mm…

120x120 PEI sheet organizer

The bottom is designed for putting 3x m3 heatinserts. print mid plates so many you need. M3 screws needed :) how long? it depends how many mid plates you print for it. for 1x top 2x mid and 1 bottom you need m3x14mm screws every layer on…

DIY Solder Fume Extractor (Fan Size 120x120x38)

This project includes all the parts of a simple soldering fan/fume extractor system that can be 3D printed. Designed to fit a standard-sized fan motor, these parts filter soldering fumes, helping to create a healthier work environment. 🔧…

120x120mm Fan Duct H 100mm and Connector

A simple duct to be connected to another duct, to be fixed to a 120x120 mm fan or to a connector which will be connected to another duct, flexible aluminum or rigid. This duct is 100 mm high , but there are others from 30 mm up to 340 mm…

Fume Extractor (Remix) - 120x120x38mm axial fan

Follow the guide by @CreativeJE_213603 - https://youtu.be/2xLQ9wforAc building the fume extrator. fan I'm using, aviable in latin america (mercadolivre) - link fan available amazon USA - link IMPORTANT: Add a Negative part to make a…

Krytka 120x120

Náhradní krytka pro sifon podomítkový ke klimatizačním jednotkám HL138N DN 32

Fan Output Cover 120x120mm works for Prusa Enclosure

Fan Cover for redirecting the airflow. 120x120mm works for Prusa Enclosure. Settings Value Infill 15% (adaptive cubic) Perimeters 2 Layer Height 0.15 mm Speed Material PETG (PLA) Supporting Material only overhangs / organic Comments…

Storage box for small items with a lid 120x120

Design Concept This storage box is designed to organize and store small items securely with a fitted lid. Its compartments are strategically arranged to offer convenient segregation and accessibility. ## Purpose Ideal for keeping small…

WORKTABLE WALL TRAY_50x120x120

Plastic tray on wall for worktable. Size 50x120x120

100x100x30mm to 120x120x16mm HEPA Filter Adapter

Had a bunch of 100x30mm filters on hand for the DELACK enclosure, built the Lack enclosure and used this passthrough exhaust design, but didn't want to buy filters until I had to. Designed in Solidworks, will probably work for other…

Remix: 120x120x32 Fan blower to 20mm ID hose

Added a lip to the hose mounting part for better fix

CPU Lüfter Adapter für 120x120 mm PC Lüfter

Ich habe mir einen Xilence I402 CPU Kühler gekauft dessen Lüfter leider relativ laut mit meinem Core I7 war. Einen 120er Lüfter hatte ich noch rumliegen, aber leider brauchte ich ne Halterung für die Montage. In der Vergangenheit habe ich…

120x120 USB Solder Fume Filter (skadis option)

*Part list below * A simple DIY 5V USB-powered solder fume extractor with filter. Printed in 2 pieces. You only need to cut the wire and solder to the switch. You can also skip the soldering and just (un)plug the USB to power on/off .…

120x120 USB Solder Fume Filter (skadis option)

*Part list below * A simple DIY 5V USB-powered solder fume extractor with filter. Printed in 2 pieces. You only need to cut the wire and solder to the switch. You can also skip the soldering and just (un)plug the USB to power on/off .…

Voron 0.1 / 0.2 Build Plate Holder – 120x120

This build plate holder is designed for 120 × 120 mm build plates used with the Voron 0.1 / 0.2 . It provides a simple and organized way to store multiple build plates while keeping them separated to protect the surface coating (such as…

1 layer adhesion test 120x120x0.2 mm Ender 3 v2

quick adhesion layer test for the ender 3 v2 or other printers with a print bed with 125x125mm bed. its very useful, so i wanted to share.

Filter for 120x120mm fan

Fan filter holder with up to 2 different filters (like Hepa, coalfilter etc). Good for printing ASA, ABS etc. How to put together? Print base part, grid and additionally print second filter part. Glue it together and mount to the Ikea…

Wall Grid Cover "Honeycomb Design" 120x120mm / 150x256mm / 150x236mm / Ø120mm

Wall Grid Cover "Honeycomb Design" - 120x120mm / 150x256mm / 150x236mm / Ø120mm - Griglia di copertura Nido d' Ape Resize/Scale to adjust dimension 03/01/2025 added Honeycomb Grid Cover Ø120MM 17/01/2025 added Honeycomb Grid Cover…

TentMod PC Fan Holder for 120x120mm

Print Guide: M5 x 30 screws and nuts partially supports! PETG! 0,4 nozzle 3 Walllines, 20% Gyroid infill pause print to insert the nut on “enclosed Nut” file, same for M5 screw The TentMod hinged PC fan module is an extension of the…

Voron 0.1 / 0.2 Build Plate Holder – 120x120

This build plate holder is designed for 120 × 120 mm build plates used with the Voron 0.1 / 0.2 . It provides a simple and organized way to store multiple build plates while keeping them separated to protect the surface coating (such as…

120x120x32 Fan blower to 20mm ID hose

This is an adapter for 120x120x32mm blower fan to 20mm ID hose for remote part cooling system. V2 is a longer with a more gradual transition to lessen the turbulence.

120x120mm Fan Duct H 30 mm

A simple duct to be connected to another duct, to be fixed to a 120x120 mm fan or to another duct, flexible aluminum or rigid. This duct is 30 mm high , but there are others from 100 mm up to 340 mm (which is the maximum height of my…