1 / 3
Twotrees Sk1 Fan Shroud for the Board
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just Shroud for your Mainboard and Steppers. Use some Double side Tape and that is
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 493
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Just Shroud for your Mainboard and Steppers.
I change the Stepper power to 1,8 amp, so I need better cooling.
Use some Double side Tape and that is
I printed in PLA for Tests. I recommend PETG or ABS/ASA
Enjoy
