Bright Pi housing for Articulating Raspberry Pi Camera Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
So I wanted to add a Bright Pi to the articulating Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 285
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
So I wanted to add a Bright Pi to the articulating Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2 https://www.thingiverse.com/thing:3114849.
I took the Bright Pi stl from the Bright Pi Camera Case thing and sliced it together with the raspiCamBack.STL from the articulating arm mount.
It was a simple cut and paste together, I printed it in draft mode and it came out great so I used it,
You will need to print BrightPi_CameraMount_Lid_v0.7.stl from https://www.thingiverse.com/thing:2784985
Props to the original designers of the parts I mashed together.
Bright Pi
https://www.digikey.com/short/477cm7
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
0.3
Infill:
25%
Filament:
Prusament PLA Galaxy Black
Notes:
I printed in 0.3mm draft on Prusa Slicer. I did add a Brim since I previously has the raspiCamBack.STL fail when it detached from the build plate.
Category: 3D Printer Accessories