Bright Pi housing for Articulating Raspberry Pi Camera Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
So I wanted to add a Bright Pi to the articulating Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 285
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
So I wanted to add a Bright Pi to the articulating Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2 https://www.thingiverse.com/thing:3114849.
I took the Bright Pi stl from the Bright Pi Camera Case thing and sliced it together with the raspiCamBack.STL from the articulating arm mount.
It was a simple cut and paste together, I printed it in draft mode and it came out great so I used it,
You will need to print BrightPi_CameraMount_Lid_v0.7.stl from https://www.thingiverse.com/thing:2784985
Props to the original designers of the parts I mashed together.
Bright Pi
https://www.digikey.com/short/477cm7
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
0.3
Infill:
25%
Filament:
Prusament PLA Galaxy Black
Notes:
I printed in 0.3mm draft on Prusa Slicer. I did add a Brim since I previously has the raspiCamBack.STL fail when it detached from the build plate.
Category: 3D Printer Accessories