4 way USB-A Splitter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Splittr, the 4 way USB-A splitter.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 280
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is Splittr: a custom-made USB-A splitter. It plugs into your laptop's USB-A port to split it 4 ways! My inspiration for this project was the fact that whenever I was working with my FRC team's robot, I could not directly interface with the control system with only 1 USB-A port on my laptop, so I made this splitter. The pcb and the case are completely my own original design.
*Please refer to my Github repository for the pcb design.
Assembly Instructions
- Put the pcb into the bottom half of the case and make sure it is secure.
- Plug the pegs into the top of the case so that they stick out the flat side. (You may need to use pliers for this step.)
- Plug the top half into the bottom half by aligning the ports on the bottom half with he pegs on the top half.
- Make sure to flatten out any pegs left up after both halves are connected.
All Done!
I hope this design is useful to people who do not have access to computers with more ports, and helpful as a project or tool to people trying to learn engineering. I also hope you like my designs! :)