4 way USB-A Splitter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Splittr, the 4 way USB-A splitter.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 4
- Makes
- 0
- Views
- 280
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is Splittr: a custom-made USB-A splitter. It plugs into your laptop's USB-A port to split it 4 ways! My inspiration for this project was the fact that whenever I was working with my FRC team's robot, I could not directly interface with the control system with only 1 USB-A port on my laptop, so I made this splitter. The pcb and the case are completely my own original design.
*Please refer to my Github repository for the pcb design.
Assembly Instructions
- Put the pcb into the bottom half of the case and make sure it is secure.
- Plug the pegs into the top of the case so that they stick out the flat side. (You may need to use pliers for this step.)
- Plug the top half into the bottom half by aligning the ports on the bottom half with he pegs on the top half.
- Make sure to flatten out any pegs left up after both halves are connected.
All Done!
I hope this design is useful to people who do not have access to computers with more ports, and helpful as a project or tool to people trying to learn engineering. I also hope you like my designs! :)