Jet Engine Piggy Bank
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Turbofan engine model piggy bank. Throw your coins between the fan blades. Cover unscrews for access to your stash.
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 248
- Wydruki
- 2
- Wyświetlenia
- 1250
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Introducing the Jet Engine Piggy Bank! Inspired by those "lucky" travelers who toss coins into real jet engines, this 3D-printed marvel combines aviation and savings in one sleek design. Shaped like a turbofan engine, this piggy bank is here to remind you that, while throwing coins into an actual jet is a terrible idea, saving them here is a genius move!
The lid (fan) screws on and off smoothly, ensuring your fortune is both secure and accessible whenever you need a "takeoff" for your next spending spree. With each coin drop, you’ll feel like you're fueling your savings jet for its next adventure. Because, let's be honest, it's much safer (and smarter) to feed your piggy bank than to risk a delayed flight!
Print Settings
- Print profile on MakerWorld for Bambu users: Jet Engine Piggy Bank by RADdesign - MakerWorld
- Material: PLA
- Infill: 8% grid
- 4 bottom and top layers
- Layer Height: 0.16mm
- Shells: 2
- Seam Position: back
Assembly Instructions:
The exhaust slides over the bottom of the nacelle to add detail. This piece is not required if you have multi-material capabilities or don't mind pausing the print to swap filaments. However, if using this piece, secure it with glue