FatterBurner - Ender 3 v3 SE Dual 5015 fan cooling shroud
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified FatBurner cooling system to fit Ender 3 v3 SE
- Ocena
- 5 / 5
- Polubienia
- 118
- Pobrania
- 569
- Wydruki
- 8
- Wyświetlenia
- 4072
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I really liked the fatburner so I modified it to fit on SE model.
You can follow along the tutorial on the original design since fatmax did a great job with photos and descriptions. You will need 3 longer m3 screws to fit trough base and spacer. Also note that on SE you have only 1 parts cooling fan connector, so you will need to splice the original wiring and wire 5015s in parallel.
Tips:
- Be patient, there is not a lot of space there and have a pair of tweezers ready!
- Only ducts needs to be printed in something more heat resistant than PLA
P.S. This model contains only the parts I modified and changed that you will need for SE, rest of files download from the original!
DISCLAIMER: Do this mod at your own risk. I am not taking responsibility if you damage your printer or hurt yourself.
- Special thanks to Lite for the original cooling model and fatmax for the remix!
