Aerodynamic Antenna Cowl / Shark Fin Antenna Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A superior aerodynamic shape for a cowl to cover antennas or instruments on the outside of a vehicle or vessel.PAY…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 325
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
A superior aerodynamic shape for a cowl to cover antennas or instruments on the outside of a vehicle or vessel.
PAY CLOSE ATTENTION TO PRINT SETTINGS
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
No
Supports:
No
2mm
Infill:
20% - Gyroidal - INFILL SUPPORT ONLY - 60 degrees
Notes:
To print this properly, you will want to make sure you use the following settings:
wall thickness: go thick, minimum 3-4 wall layers
wall ordering: outside to inside
top/bottom thickness: 0
Infill Support Only: Yes (Cura: check "Infill Support")
Infill Overhang Angle: 60
This will print the outer contour and leave the bottom open so you can stuff your antennas etc inside it.
Simply scale up/down in slicer for different sizes.
Category: Automotive