1 / 1
Aerodynamic Antenna Cowl / Shark Fin Antenna Cover — image 1

Aerodynamic Antenna Cowl / Shark Fin Antenna Cover

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A superior aerodynamic shape for a cowl to cover antennas or instruments on the outside of a vehicle or vessel.PAY…

Rating
0 / 5
Likes
2
Downloads
28
Makes
0
Views
325
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Share Alike

A superior aerodynamic shape for a cowl to cover antennas or instruments on the outside of a vehicle or vessel.

PAY CLOSE ATTENTION TO PRINT SETTINGS

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

**Rafts:**

No

Supports:

No

**Resolution:**

2mm

Infill:

20% - Gyroidal - INFILL SUPPORT ONLY - 60 degrees

**Filament:** Any Any (recommend PETG/ABS) Any (recommend light)

Notes:

To print this properly, you will want to make sure you use the following settings:

wall thickness: go thick, minimum 3-4 wall layers
wall ordering: outside to inside
top/bottom thickness: 0
Infill Support Only: Yes (Cura: check "Infill Support")
Infill Overhang Angle: 60

This will print the outer contour and leave the bottom open so you can stuff your antennas etc inside it.

Simply scale up/down in slicer for different sizes.

Category: Automotive

Tags